Yamaha MT-10 SP 2016, Руководство пользователя

Страница: 28 / 118

Instrument and control functions
4-8
1
2
3
4
5
6
7
8
9
10
11
12
NOTICE
ECA22441
If the oil pressure and coolant warn-
ing light does not go off after start-
ing the engine or if it comes on while
the engine is running, stop the vehi-
cle and engine immediately.

If the engine is overheating, the
coolant temperature warning
icon will come on. Let the en-
gine cool. Check the coolant
level (see page 7-38).

If the engine oil pressure is low,
the oil pressure warning icon
will come on. Check the oil level
(see page 7-10).

If the warning light remains on
after letting the engine cool and
confirming the proper oil level,
have a Yamaha dealer check the
vehicle. Do not continue to op-
erate the vehicle!
EAU78423
Steering damper and suspension
warning light “ ”
This warning light comes on if a prob-
lem is detected in the electronic sus-
pension or steering damper.
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
EAU78292
Display
The display has two different main
screen display modes, STREET
MODE and TRACK MODE. Most of the
functions are viewable in either mode,
but the layout differs slightly. The fol-
lowing items can be found on the dis-
play.

Speedometer

Tachometer

Fuel meter

Information display

Transmission gear display

YRC setting display MODE/PWR/
TCS/ERS

QS indicator

Clock

Revolution peak hold indicator

Lap timer

Fuel level warning icon

Oil pressure warning icon

Coolant temperature warning icon

SCU trouble warning icon

ECU trouble warning icon
TIP
This model uses a thin-film-transistor
liquid-crystal display (TFT LCD) for
BW8-9-E0_1.book 8 ページ ２０１６年１２月１３日 火曜日 午前１０時３９分