Yamaha MT-03 2017, Руководство пользователя

Страница: 17 / 96

Instrument an d control functions
3-3
3
The electrical circuit of the warning
light can be checked by turning the key
to “
”. The warning light should come
on and remain on until the engine is
started.
If the warning light does not come on
initially when the key is turned to “
”,
have a Yamaha dealer check the elec-
trical circuit.
NOTICE
ECA21210
If the warnin g li g ht comes on when
the en g ine is runnin g , stop the en-
g ine imme d iately an d check oil level.
If the oil level is b elow the minimum
level, a dd sufficient oil of the recom-
men d e d type to raise it up to the cor-
rect level. If the oil pressure warnin g
li g ht remains on even if the oil level
is correct, imme d iately turn the en-
g ine off an d have a Yamaha d ealer
check the vehicle.
TIP
If the warning light does not go off after
starting the engine, check the engine
oil level and add oil if necessary. (See
page 6-8.)
If the warning light remains on after
adding engine oil, have a Yamaha
dealer check the vehicle.
EAU62790
En g ine trou b le warnin g li g ht “ ”
This warning light comes on or flashes
if a problem is detected in the electrical
circuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system.
The electrical circuit of the warning
light can be checked by turning the key
to “
”. The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to “
”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
The engine trouble warning light will
come on while the start switch is
pushed, but this does not indicate a
malfunction.
EAU51662
ABS warnin g li g ht “ ”
In normal operation, the ABS warning
light comes on when the key is turned
to “ON”, and goes off after traveling at
a speed of 10 km/h (6 mi/h) or higher.
If the ABS warning light:
z
does not come on when the key is
turned to “ON”
z
comes on or flashes while riding
z
does not go off after traveling at a
speed of 10 km/h (6 mi/h) or high-
er
The ABS may not work correctly. If any
of the above occurs, have a Yamaha
dealer check the system as soon as
possible. (See page 3-14 for an expla-
nation of the ABS.)
WARNING
EWA16041
If the ABS warnin g li g ht d oes not g o
off after travelin g at a spee d of 10
km/h (6 mi/h) or hi g her, or if the
warnin g li g ht comes on or flashes
while ri d in g , the b rake system re-
verts to conventional b rakin g . If ei-
ther of the a b ove occurs, or if the
warnin g li g ht d oes not come on at
all, use extra caution to avoi d possi-
b le wheel lock d urin g emer g ency
ABS
UB9AE0E0.book Page 3 Thursday, March 23, 2017 2:48 PM