MS101-4 Owner’s Manual
6
Front Panel / Rear Panel
1
[
P
] (power) switch/indicator
Press this switch to switch the power
between on (
O
) and standby (
N
).
When the power is turned on, the
power indicator comes on.
NOTICE
• Even when the switch is in the standby
position, a small amount of electricity is
still flowing to the unit.
• Rapidly turning the unit on and off in
succession can cause it to malfunction.
After turning the unit off, wait for about
6 seconds before turning it on again.
2
LOW control
Turn this control clockwise to boost low
frequencies and counterclockwise to
reduce them.
3
HIGH control
Turn this control clockwise to boost
high frequencies and
counterclockwise to reduce them.
4
VOLUME control
Use this control to set the volume level.
NOTICE
If the sound is distorted, the power may be
turned off to protect the product. In this
case, turn down the volume and then turn
the power on again. If you play at the same
volume, the power may be turned off again,
so make sure to lower the volume below the
previous setting.
1
2
3
7
8
9
4 5
)
6
Bass reflex port
