manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Руководство пользователя, Страница: 207 / 300

Поделиться
Скачать
Yamaha MOTIF6 Voice Editor Скачать руководство пользователя страница 207

207

MOTIF  Reference

Song Mixing mode

Reference

  

Song mode

• Template number

Determines the template number.  Up to 16 templates can 
be created.

❏

Settings

1~16

• Template name

Determines the name of the template. For details about 
naming, see “Basic Operation”  on page 75. 

Song Mixing Edit mode 
(Detailed Mixer functions)

◆

 The Compare Function

This convenient function lets you switch between the 
edited mixing setting and its original, unedited 
condition — allowing you to listen to the difference 
between the two and better hear how your edits affect 
the song.

1

  In the Song Mixing Edit mode, press the 

[COMPARE] button so that its indicator flashes. 
The [

] indicator is shown at the top of the 

display (in place of the [

] indicator), and the 

original, unedited Song Mixing settings are 
restored for monitoring.

2

  Press the [EDIT] button again to disable the 

“Compare” function and restore the settings for 
your edited Song. 

n

While Compare is active, you cannot make Song 
Mixing edits.

◆

 Common edit and Part edit 

Use Common Edit to edit the settings common to all 
parts. There are two types of Song Mixing displays: 
those for Common Edit, and those for editing 
individual parts.

n

Common Edit operations cannot be performed on 
the Multi-part Plug-in parts 17 - 32.

◆

 Basic Procedure

1

  In the Song Play mode, select a User Song to be 

mixed. 

2

  Press the [MIXING] button to enter the Song 

Mixing mode.  (The indicator lights.)

3

  Press the [EDIT] button to enter the Song Mixing 

Edit mode.  (The indicator lights.)

4

  Select a part to be edited. 

• To edit parameters common to all parts, press the 

[DRUM KITS] button (which serves as a 
“COMMON” button here).

EDIT

COMPARE

Indicates a Common Edit display.

Indicates a display for editing Part(s).

COMMON

Part 1

Part 2 

Part 3

Part 16

Plug-in Part 1

Plug-in Part 2

Plug-in Part 3

DRUM KITS

FAVORITES

COMMON

Содержание MOTIF6 Voice Editor













































































































































































































































































































Отзывы:

Нет отзывов