manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Руководство пользователя

Редактор голоса Yamaha MOTIF6 обеспечивает возможность загрузки бесплатных обновлений прошивки и руководств. Управляйте звуком своего устройства, загружая необходимые ресурсы с manualshive.com. Получите доступ к дополнительным функциям и настройкам, улучшайте свой опыт работы с музыкальным оборудованием.

Поделиться
Скачать
background image

139

MOTIF  Reference

Voice Edit mode

Reference

  

Voice mode

●

[F2]-[SF2] Normal Element   Pitch   
Velocity Sensitivity

From this display you can determine how the Pitch 
EG responds to velocity. (For Pitch EG settings, see 
“PEG Time, Level” below.)

• EG Time, Segment

Determines the velocity sensitivity of the PEG’s Time 
parameters. Select the Segment, then set its Time 
parameter. Positive Time settings will play back the 
specified Segment faster and negative values will play it 
back slower. 

❏

Settings

Time

-64 ~0 ~+63

Segment

ATK, ATK+DCY, DCY, 
ATK+RLS, all

ATK
EG Time Value affects Attack time.

ATK+DCY
EG Time Value affects Attack/Decay1 time.

DCY
EG Time Value affects Decay time.

ATK+RLS
EG Time Value affects Attack/Release time.

all
EG Time Value affects all PEG Time parameters.

• EG Level, Curve

Determines the velocity sensitivity of the PEG Level. 
Positive settings will cause the level to rise the harder you 
play the keyboard, and negative values will cause it to fall.
The Curve parameter lets you select from five different 
preset velocity curves (graphically indicated in the 
display), that determine how velocity affects the Pitch EG.

❏

Settings

EG Level

-64 ~0 ~+63

Curve

0~4

• Pitch

Determines the degree to which velocity affects the pitch 
change of the Pitch EG. Extreme values produce greater 
variation in pitch change. For positive values, the harder 
you play the keys, the greater the change in pitch. For 
negative values, the softer you play the keys, the greater 
the change in pitch.

❏

Settings

-64 ~ 0 ~+63

●

[F2]-[SF3] Normal Element   Pitch   
PEG Time, Level

Basic Structure (page 46)

From this display you can make all the time and 
level settings for the Pitch EG, which determine 
how the pitch of the sound changes over time. 
These can be used to control the change in pitch 
from the moment a note is pressed on the keyboard 
to the moment the sound stops.

 

The full names of the available parameters are 
shown in the chart below, as they appear in the 
display.

• TIME

❏

Settings

0 ~127

• LEVEL

❏

Settings

-128 ~ 0 ~+127 (-4800cent ~ 0 
~+4800cent)

• DEPTH*

❏

Settings

-64 ~ 0 ~+63

●

[F2]-[SF4] Normal Element   Pitch   Key Follow

From this display you can set the Key Follow effect 
— in other words, how the pitch of the element and 
its Pitch EG respond to the particular notes (or 
octave range) you play.

• PitchSens (Pitch Sensitivity)

Determines the degree to which the notes (specifically, 
their position or octave range) affect the pitch of the 
selected element. The Center Key (next parameter) is used 
as the basic pitch for this parameter.
A positive setting will cause the pitch of lower notes to 
change lower and that of higher notes to change higher. 
Negative values will have the opposite effect. 

❏

Settings

-200% ~ 0 ~ +200% 

n

For a setting of 100%, neighboring notes are 
pitched one semitone (100 cents) apart.

HOLD

ATK

DCY1

DCY2

REL

DEPTH*

TIME

Hold time

Attack time

Decay 1 

time

Decay 2 

time

Release 

time

LEVEL Hold level Attack level

Decay 1 

level

Decay 2 

level

Release 

level

Depth

0

Release

Level

Attack

Level

Hold level

Attack

Time

Hold

Time

Decay1

Time

Decay2

Time

Release

Time

Decay1

Level

Decay2

Level

Key off

Time

Pitch

Содержание MOTIF6 Voice Editor













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF6 Voice Editor

Canon Optura Pi Software Starter Manual preview
Optura Pi
Бренд: Canon Страницы: 90
NEC Versa LX Important Information preview
Versa LX
Бренд: NEC Страницы: 4
Nero Nero Express 9 Manual preview
Nero Express 9
Бренд: Nero Страницы: 76
National Instruments NI Spectral Measurements Toolkit User Manual preview
NI Spectral Measurements Toolkit
Бренд: National Instruments Страницы: 35
Kenwood MediaManager Installation Manual preview
MediaManager
Бренд: Kenwood Страницы: 40
Seagate BlackArmor WS 110 Quick Start Manual preview
BlackArmor WS 110
Бренд: Seagate Страницы: 2
Avaya PARTNER ACS PC Administration Getting Started Manual preview
PARTNER ACS PC Administration
Бренд: Avaya Страницы: 56
Avaya P120 SMON User Manual preview
P120 SMON
Бренд: Avaya Страницы: 61
Red Hat ENTERPRISE LINUX 3 - SECURITY GUIDE Manual preview
ENTERPRISE LINUX 3 - SECURITY GUIDE
Бренд: Red Hat Страницы: 410
Konica Minolta CM-SA Brochure preview
CM-SA
Бренд: Konica Minolta Страницы: 4
Konica Minolta Konica Print Utility KP User Reference Manual preview
Konica Print Utility KP
Бренд: Konica Minolta Страницы: 52
AirLive AIRTV-1000U User Manual preview
AIRTV-1000U
Бренд: AirLive Страницы: 19
Nordic Messaging Technologies XFAX User Manual preview
XFAX
Бренд: Nordic Messaging Technologies Страницы: 62
DigiDesign Trillium Lane Labs Manual preview
Trillium Lane Labs
Бренд: DigiDesign Страницы: 114
FieldServer FS-8704-13 Driver Manual preview
FS-8704-13
Бренд: FieldServer Страницы: 19
KAPERSKY ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2004-2006 STANDARD... Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2004-2006 STANDARD...
Бренд: KAPERSKY Страницы: 75
KAPERSKY ANTI-VIRUS 7.0 User Manual preview
ANTI-VIRUS 7.0
Бренд: KAPERSKY Страницы: 235
DataCard Tru Photo Supplementary Manual preview
Tru Photo
Бренд: DataCard Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды