manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Руководство пользователя

Редактор голоса Yamaha MOTIF6 обеспечивает возможность загрузки бесплатных обновлений прошивки и руководств. Управляйте звуком своего устройства, загружая необходимые ресурсы с manualshive.com. Получите доступ к дополнительным функциям и настройкам, улучшайте свой опыт работы с музыкальным оборудованием.

Поделиться
Скачать
background image

133

MOTIF  Reference

Voice Edit mode

Reference

  

Voice mode

• Hold 

Determines whether the Arpeggio playback is “held” or 
not. When this is set to “on,” the Arpeggio cycles 
automatically, even if you release your fingers from the 
keys, and it continues to cycle until the next key is pressed.

❏

Settings

sync-off (see below), off, on

sync-off
The first time you press a key, the first note of the 
arpeggiator pattern is played. From the second and 
subsequent key presses, the arpeggiator note that is 
played back depends on the arpeggiator tempo and the 
timing of the arpeggio pattern. For example, in the case 
of a 1-bar arpeggio pattern, if the second key press falls 
on the third beat of the bar, the arpeggio pattern plays 
back from the third beat onward. In other words, the 
first key press is used to start the arpeggio pattern and 
thereafter you can use the key to “mute” or “un-mute” 
the pattern by, respectively, holding it down or 
releasing it. This is particularly useful when the 
arpeggiator is being used to generate drum patterns.

• KeyMode

Determines how the Arpeggio plays back when playing the 
keyboard. Three modes are available.

❏

Settings

sort, thru, direct

sort
Plays back notes in ascending order from the lowest 
key pressed to the highest.

thru
Plays back notes in the order in which the keys are 
pressed.

direct
Plays back the notes exactly as you play them. If 
changes to Voice parameters (such as Pan or Cutoff 
frequency) are included in the Arpeggio sequence data, 
they will be applied and reproduced whenever the 
Arpeggio plays back.

n

If the Arpeggio Category is set to Ct, you will not 
hear any sounds unless you select “direct” here.

n

With the “sort” and “thru” settings, the order in 
which notes are played back will depend on the 
Arpeggio sequence data.

• VelMode

This determines the playback velocity of the Arpeggio, or 
how it responds to your own playing strength. Two modes 
are available: original and thru.

❏

Settings

original, thru 

original
The Arpeggio plays back at the preset velocities.

thru
The Arpeggio plays back according to the velocity of 
your playing. For example, if you play the notes 
strongly, the playback volume of the Arpeggio 
increases.

●

[F3]-[SF2] Normal Common   Arpeggio   
Arpeggio limit

• Note Limit

Determines the lowest and highest notes in the Arpeggio’s 
note range. Notes played in this range trigger the Arpeggio.

❏

Settings

C -2 ~ G8

n

You can also create a lower and an upper trigger 
range for the Arpeggio, with a “hole” in the middle, 
by specifying the highest note first. For example, 
setting a Note Limit of “C5 -C4” lets you trigger the 
Arpeggio by playing notes in the two ranges of C -2 
to C4 and C5 to G8; notes played between C4 and 
C5 have no effect on the Arpeggio.

n

You can also set the range directly from the 
keyboard, by holding down the [INFORMATION] 
button and pressing the desired low and high keys.

• Velocity Limit

Determines the lowest and highest velocity in the 
Arpeggio’s velocity range. This lets you control when the 
Arpeggio sounds by your playing strength.

❏

Settings

1 ~ 127

n

You can also create separate low and high trigger 
ranges for the Arpeggio playback, with a velocity 

“

hole

”

 in the middle, by specifying the maximum 

value first. For example, setting a Velocity Limit of 
93 - 34 lets you play the Arpeggio from two 
separate velocity ranges: soft (1 - 34) and hard (93 - 
127). Notes played at middle velocities between 35 
and 92 do not play the Arpeggio.

●

[F3]-[SF3] Normal Common   Arpeggio   
Play FX (Effect)

These Play Effect parameters let you control the 
playback of the Arpeggio in useful and interesting 
ways. By changing the timing and velocity of the 
notes, you can change the rhythmic “feel” of the 
Arpeggio.

• Unit

Adjust the Arpeggio playback time. For example, if you set 
a value of 200%, the playback time will be doubled and the 
tempo halved. On the other hand, if you set a value of 
50%, the playback time will be halved and the tempo 
doubled. Normal playback time is 100%. 

❏

Settings

50%, 66%, 75%, 100%, 133%, 150%, 
200%

Содержание MOTIF6 Voice Editor













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF6 Voice Editor

Avaya C460 SMON Quick Start Manual preview
C460 SMON
Бренд: Avaya Страницы: 20
Epson PC Free Operation Manual preview
PC Free
Бренд: Epson Страницы: 22
Epson Message Broadcasting Getting Started Manual preview
Message Broadcasting
Бренд: Epson Страницы: 9
Epson EX3200 Brochure & Specs preview
EX3200
Бренд: Epson Страницы: 4
Epson LQ-860 - Impact Printer Specifications preview
LQ-860 - Impact Printer
Бренд: Epson Страницы: 8
Epson EX3220 Product Overview And Specifications preview
EX3220
Бренд: Epson Страницы: 4
Epson C300011B - Stylus Pro 5500 Color Inkjet Printer Getting Started Manual preview
C300011B - Stylus Pro 5500 Color Inkjet Printer
Бренд: Epson Страницы: 11
Epson LQ Color driver Product Support Bulletin preview
LQ Color driver
Бренд: Epson Страницы: 11
Epson Photo File Uploader3 User Manual preview
Photo File Uploader3
Бренд: Epson Страницы: 61
Epson PowerLite 1915 Brochure & Specs preview
PowerLite 1915
Бренд: Epson Страницы: 4
Epson PowerLite 4200W Brochure preview
PowerLite 4200W
Бренд: Epson Страницы: 6
Epson EX5200 Quick Setup Manual preview
EX5200
Бренд: Epson Страницы: 4
Epson PowerLite 1880 Specifications preview
PowerLite 1880
Бренд: Epson Страницы: 6
Epson C82357 User Manual preview
C82357
Бренд: Epson Страницы: 57
Epson C31C489111 - TM J7000P B/W Inkjet Printer User Manual preview
C31C489111 - TM J7000P B/W Inkjet Printer
Бренд: Epson Страницы: 149
Epson MACLQ (Talk I/F for LQ Printers) User Manual preview
MACLQ (Talk I/F for LQ Printers)
Бренд: Epson Страницы: 65
Epson PowerLite 1222 User Manual preview
PowerLite 1222
Бренд: Epson Страницы: 204
Epson Advanced Printer Driver Ver.4 Install Manual preview
Advanced Printer Driver Ver.4
Бренд: Epson Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды