manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

MOTIF XS Owner’s Manual

305

About the accessory disk

SPECIAL NOTICE

• The software included in the accessory disk and the 

copyrights thereof are under exclusive ownership by 
Steinberg Media Technologies GmbH.

• Use of the software and this manual is governed by the 

license agreement which the purchaser fully agrees to upon 
breaking the seal of the software packaging. (Please read 
carefully the Software Licensing Agreement at the end of 
this manual before installing the application.)

• Copying of the software or reproduction of this manual in 

whole or in part by any means is expressly forbidden without 
the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard 

to the use of the software and documentation and cannot be 
held responsible for the results of the use of this manual and 
the software.

• This disk is NOT for audio/visual purpose. Do not attempt to 

play the disk on an audio/visual CD/DVD player. Doing so 
may result in irreparable damage to your player. 

• For information about the minimum system requirements 

and latest information of the software in the disk, check the 
web site below. 
<http://www.yamahasynth.com/>

• Note that Yamaha does not offer technical support for the 

DAW software in the accessory disk. 

About the DAW software in the accessory disk

The accessory disk contains DAW software both for Windows 
and Macintosh. 

n

• Make sure to install DAW software under the “Administrator” 

account. 

• In order to have continuous use of the DAW software in the 

accessory disk, including support and other benefits, you 
will need to register the software and activate your software 
license by starting it while the computer is connected to the 
Internet. Click the "Register Now" button shown when the 
software is started, then fill in all required fields for 
registration. If you do not register the software, you will be 
unable to use it after a limited period of time expires.

• If you are using a Macintosh computer, double-click the 

“***.pkg” file to start installation. 

For information about the minimum system requirements and 
latest information on the software in the disk, check the web 
site below. 
<http://www.yamahasynth.com/>

About software support

Support for the DAW software in the accessory disk is 
provided by Steinberg on its website at the following address.
http://www.steinberg.net

You can visit the Steinberg site also via the Help menu of the 
included DAW software. (The Help menu also includes the 
PDF manual and other information on the software.)

ATTENTION

SOFTWARE LICENSE AGREEMENT

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT 
(“AGREEMENT”) CAREFULLY BEFORE USING THIS 
SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS 
SOFTWARE PURSUANT TO THE TERMS AND 
CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT 
IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL 
ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).

BY BREAKING THE SEAL OF THIS PACKAGE YOU ARE 
AGREEING TO BE BOUND BY THE TERMS OF THIS 
LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO 
NOT INSTALL, COPY, OR OTHERWISE USE THIS 
SOFTWARE.

THIS AGREEMENT PROVIDES YOUR USE-CONDITIONS 
ABOUT THE “DAW” SOFTWARE OF STEINBERG MEDIA 
TECHNOLOGIES GMBH(“STEINBERG”) WHICH IS 
BUNDLED WITH THIS PRODUCT. SINCE THE END-USER 
SOFTWARE LICENSE AGREEMENT (EUSLA) SHOWED 
ON YOUR PC-DISPLAY IN YOUR INSTALLING THE “DAW” 
SOFTWARE IS REPLACED BY THIS AGREEMENT, YOU 
SHOULD DISREGARD THE EUSLA. THAT IS, IN THE 
INSTALLING PROCESS, YOU SHOULD SELECT “AGREE” 
WITH THE EUSLA, WITHOUT YOUR JUDGMENT 
THERETO, SO AS TO PROCEED TO THE NEXT PAGE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use one copy of the 
software program(s) and data (“SOFTWARE”) 
accompanying this Agreement. The term SOFTWARE shall 
encompass any updates to the accompanying software 
and data. The SOFTWARE is owned by STEINBERG, and is 
protected by relevant copyright laws and all applicable 
treaty provisions. Yamaha has acquired the sublicense 
right to license you to use the SOFTWARE. While you are 
entitled to claim ownership of the data created with the use 
of SOFTWARE, the SOFTWARE will continue to be 
protected under relevant copyrights.

•

You may

 use the SOFTWARE on a 

single computer

.

•

You may

 make one copy of the SOFTWARE in machine-

readable form for backup purposes only, if the SOFTWARE 
is on media where such backup copy is permitted. On the 
backup copy, you must reproduce Yamaha's copyright 
notice and any other proprietary legends that were on the 
original copy of the SOFTWARE.

•

You may

 permanently transfer to a third party all your rights 

in the SOFTWARE only when you transfer this product 
together, provided that you do not retain any copies and the 
recipient reads and agrees to the terms of this Agreement.

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

AbleNet BigBlu VisionBoard Quick Start Manual preview
BigBlu VisionBoard
Бренд: AbleNet Страницы: 8
TACTYS SLIM 711 Instructions For Use Manual preview
SLIM 711
Бренд: TACTYS Страницы: 12
Active Key MedicalKey AK-C4110 User Manual preview
MedicalKey AK-C4110
Бренд: Active Key Страницы: 2
Active Key MedicalKey AK-C8100 User Manual preview
MedicalKey AK-C8100
Бренд: Active Key Страницы: 2
Active Key AK-C7000 User Manual preview
AK-C7000
Бренд: Active Key Страницы: 2
Active Key AK-C7000F-F Instructions preview
AK-C7000F-F
Бренд: Active Key Страницы: 2
Active Key AK-C4110F-F Instructions preview
AK-C4110F-F
Бренд: Active Key Страницы: 2
Acer Predator Aethon 100 Quick Start Manual preview
Predator Aethon 100
Бренд: Acer Страницы: 5
Franklin TGA-490 User Manual preview
TGA-490
Бренд: Franklin Страницы: 45
Dell KB740 User Manual preview
KB740
Бренд: Dell Страницы: 18
Dell KB3121Wp/DGRFEO User Manual preview
KB3121Wp/DGRFEO
Бренд: Dell Страницы: 15
Dell KB700 User Manual preview
KB700
Бренд: Dell Страницы: 24
Dell KB5220W-C User Manual preview
KB5220W-C
Бренд: Dell Страницы: 10
Dell KW14M Quick Start Manual preview
KW14M
Бренд: Dell Страницы: 4
Ducky Shine 5 User Manual preview
Shine 5
Бренд: Ducky Страницы: 1
Ducky DKSH1408SD User Manual preview
DKSH1408SD
Бренд: Ducky Страницы: 1
Ducky One 3 User Manual preview
One 3
Бренд: Ducky Страницы: 44
Ducky DKME1961ST User Manual preview
DKME1961ST
Бренд: Ducky Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды