manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual

262

%

[SF5] Password

Pressing this button calls up the Password display that lets 
you set or change the password necessary for accessing 
the MOTIF XS from an online device connected to the 
network. When shipped from the factory, the password is 
not set. Make sure to set the password if you wish to 
access the MOTIF XS from an external computer via the 
LAN network. 

From this display, you can set the password of the MOTIF 
XS. By using the password set here, external online 
devices can access the File mode of the MOTIF XS. 

1

Current Password

This column is provided for inputting the current password. 
The password can be up to eight characters and no less 
than five characters. For detailed instructions on inputting 
characters, see page 82. “None” is shown when the 
password is not set. 

2

New Password

This column is provided for inputting the new password. 
The password can be up to eight characters and no less 
than five characters. For detailed instructions on inputting 
characters, see page 82. 

3

Confirm Password

This column is provided for inputting the new password 
once again to confirm it. The password can be up to eight 
characters and no less than five characters. For detailed 
instructions on inputting characters, see page 82. 

Password Setting

After inputting the Current Password, New Password and 
Confirm Password (New Password), press the [ENTER] 
button to set the New Password. If an error occurs, one of 
the following error messages will be shown on the display. 

Password is invalid.

The password you input to “Current Password” is wrong. Input 
the correct password again. 

Confirmed password is invalid.

The password you input to “Confirm Password” is not same as 
the password you input to “New Password.” 

Password is too short.

The password you input to “New Password” is too short. Input 
the password again, using five or more characters. 

n

If you forget the current password, execute the Factory Set 
Job (page 269) to reset the password setting, then input the 
new password again. 

From this display, you can specify certain automatic tasks 
that the MOTIF XS will perform when power is turned on. 

1

Auto Load

Determines whether the Auto Load function is on or off. 
When this is on, the instrument will automatically load the 
specified files (from the USB storage device) to User 
memory—whenever the power is turned on. The file to be 
loaded is shown on this display. The file to be loaded can 
be specified via the [SF5] Get button. 

Settings:

on, off

2

Power On Mode

This determines the default power-on mode (and memory 
bank)—letting you select which condition is automatically 
called up when you turn the power on. 

Settings:

performance

When turning the power on next time, the Performance Play mode is 
entered and the first program number (USER: 001) is selected 
automatically. 

voice (USER1)

When turning the power on next time, the Voice Play mode is entered 
and the first program number of User Voices (USR: 001) is selected 
automatically. 

voice (PRE1)

When turning the power on next time, the Voice Play mode is entered 
and the first program number of Preset Voices (PRE: 001) is selected 
automatically. 

voice (GM)

When turning the power on next time, the Voice Play mode is entered 
and the first program number of Preset GM Voices (GM: 001) is 
selected automatically. 

master

When turning the power on next time, the Master Play mode is entered 
and the first program number (001) is selected automatically. 

n

Make sure to store the Utility settings to the internal memory by 
pressing the [STORE] button before turning the power off. 
Please keep in mind that the Utility settings will be lost if you 
turn off the power without executing the Store operation. 

Password Settings
[SF3] 

➞

 [SF5] Password

1

2

3

Setting the default display when 
turning the power on—[SF4] Auto Load

1
2

3

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Magicforce smart Quick Start Manual preview
smart
Бренд: Magicforce Страницы: 2
Fatar MP-1 User Manual preview
MP-1
Бренд: Fatar Страницы: 3
SILITEN DK-9201BI User Manual preview
DK-9201BI
Бренд: SILITEN Страницы: 10
Connect IT CKB-2000-CS User Manual preview
CKB-2000-CS
Бренд: Connect IT Страницы: 16
Kurzweil PC3A User Manual preview
PC3A
Бренд: Kurzweil Страницы: 423
Vibra SJP-CE Series Operation Manual preview
SJP-CE Series
Бренд: Vibra Страницы: 35
Polar Electro IR INTERFACE Operating Instructions preview
IR INTERFACE
Бренд: Polar Electro Страницы: 2
Nav TV MOST-HUR MB User Manual preview
MOST-HUR MB
Бренд: Nav TV Страницы: 6
Korg Karma Basic Manual preview
Karma
Бренд: Korg Страницы: 118
Acrox Technologies KB15 User Manual preview
KB15
Бренд: Acrox Technologies Страницы: 8
APRI FBSN-4FD Assembly Manual preview
FBSN-4FD
Бренд: APRI Страницы: 5
schwa-medico EMP 2 PRO Operating Instructions Manual preview
EMP 2 PRO
Бренд: schwa-medico Страницы: 28
Gigabyte S1080 Quick Start Manual preview
S1080
Бренд: Gigabyte Страницы: 2
ADX FIREFIGHT MK04 Instruction Manual preview
FIREFIGHT MK04
Бренд: ADX Страницы: 12
Elite EKT-200 Instruction Manual preview
EKT-200
Бренд: Elite Страницы: 8
Roland BHA-2 Brochure & Specs preview
BHA-2
Бренд: Roland Страницы: 5
Partner KB-1140M User Manual preview
KB-1140M
Бренд: Partner Страницы: 12
Partner ER400 Professional User Manual preview
ER400 Professional
Бренд: Partner Страницы: 25

Бренды по названию

Популярные бренды

Загрузить еще бренды