Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)
MOTIF XS Owner’s Manual
236
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
You can apply 3-band parametric EQ to each Part to adjust
the sound.
The function is the same as the one in the EQ display
(page 158) in the Performance Part Edit mode.
From this display you can set how each individual Part
responds to various MIDI data, such as Control Change
and Program Change messages. When the relevant
parameter is set to “on,” the corresponding Part responds
to the appropriate MIDI data.
The function is the same as the one in the Receive Switch
display (page 158) in the Performance Part Edit mode. In
addition to the parameters which can be set in the
Performance Part Edit mode, the Program Change and
Bank Select can be set in this display of the Mixing mode.
Mixing Job—Convenient functions
The Mixing Job mode features some convenient data organization and initialization tools, for use when creating
Performances and archiving them. To enter the Mixing Job mode, press the [JOB] button in the Mixing mode. Press the
[EXIT] button to return to the Mixing Play mode.
1
In the Mixing mode or Mixing Edit mode, press
the [JOB] button to enter the Mixing Job mode.
2
Call up the desired Mixing Job menu by
pressing the appropriate button ([F1] – [F6]).
3
Set the parameters for executing the Job.
4
Press the [ENTER] button. (The display
prompts you for confirmation.)
To cancel the Job, press the [DEC/NO] button.
5
Press the [INC/YES] button to execute the Job.
After the Job has been completed, a “Completed”
message appears and operation returns to the original
display.
6
Press the [MIXING] button to return to the
Mixing Play mode.
Even if you execute the Job, selecting a different Song/Pattern or
turning the power off without storing will erase the Mixing data.
Make sure to store the Song/Pattern data (including the Mixing) to
internal memory by pressing the [STORE] button before selecting
a different Song/Pattern or turning the power off.
This function lets you reset (initialize) all Mixing parameters
to their default settings. It also allows you to selectively
initialize certain parameters, such as Common settings,
settings for each Part, and so on.
1
All Parameters
All settings for the selected Mixing are initialized. When this
is set to on, the Common parameters (
2
) and Part
parameters (
3
) cannot be set.
2
Common Parameters
Common parameter settings for the selected Mixing are
initialized.
n
The Insertion Effect Switch is a Part parameter. Therefore,
checkmark the desired boxes of Parts 1 – 16 (described
below) if you wish to initialize the Insertion Effect Switch
parameter settings.
3
Part Parameters
Part 1 – 16
Mixing Part Edit settings (page 235) for Parts which are turned
on are initialized.
A/D (A/D Input)
This Part is input from the external audio equipment
connected to the A/D INPUT jack. Parameter settings for the A/
D input Part (page 234) of Common Edit are initialized.
mLAN
This Part is input from the external audio equipment
connected to the mLAN jack. When this is checkmarked,
parameter settings for the mLAN Part (page 234) of Common
Edit are initialized.
n
The “mL” setting is available only for the MOTIF XS8. This
is available for MOTIF XS6/7 only when an optional
mLAN16E2 has been installed.
Equalizer (EQ) Settings—[F5] EQ
(Equalizer)
MIDI Receive Settings—[F6] RcvSwitch
(Receive Switch)
Mixing Job Procedure
Initializing the Mixing—[F1] Init
CAUTION
1
2
3
4
Содержание MOTIF XS6
Страница 1: ......
