manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)

MOTIF XS Owner’s Manual

232

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

4

Bank

5

Number

These determine the selected Voice. Press the 
[PROGRAM] button (the lamp lights), then the desired 
Voice by using the [PRE 1] – [USER DR] buttons, [A] – [H] 
buttons and the [1] – [16] buttons. The name of the 
selected Voice is shown at the right top of the display. 

Settings:

Number:

 1 – 128

Bank:

 PR1 – 8 (Preset 1 – 8), US1 – 3 (User 1 – 3), GM, GD (GM Drum), 

PD (Preset Drum), UD (User Drum), SP (Sample Voice), MV (Mixing 
Voice)

6

Rev Send (Reverb Send)

Adjusts the Reverb send level for each Part. The higher the 
value, more pronounced the Reverb effect. 

Settings:

0 – 127

7

Cho Send (Chorus Send)

Adjusts the Chorus send level for each Part. The higher the 
value, more pronounced the Chorus effect. 

Settings:

0 – 127

8

Pan

Determines the position in the stereo field for each Part. 

Settings:

L63 (far left) – C (center) – R63 (far right)

9

Ins FX Sw (Insertion Effect Switch)

Determines the Parts available for the Insertion Effect. 
When this switch is set to on, the Insertion Effect of the 
Voice assigned to the Part enabled. Make sure that this 
parameter is set to on for any Parts/Voices to which you 
need to apply Insertion Effects. 
The MOTIF XS features eight Insertion effect systems, 
letting you set this parameter to on for up to eight Parts. If 
eight Parts are already turned on, the parameter cannot be 
turned on for additional Parts. In this case, the switch for 
another Part must be turned off before you can turn the 
switch for the desired Part on. Please note that the 
Insertion Effects are available simultaneously for up to 
eight Parts including the A/D Input Part. 

Settings:

B

 (on), 

A

 (off)

)

Volume

Determines the output level of the Part. 

Settings:

0 – 127

!

[F1] Part 1 – 16

Calls up this display from the Audio Mixer display. 

@

[F2] Audio (Audio Part)

Calls up the Audio Part display for setting the Audio Input. 

#

[F5] Effect

Calls up the Effect display (page 234) in the Common Edit 
mode. 

$

[F6] Vce Edit (Mixing Voice Edit)

Enters the Mixing Voice Edit mode, letting you edit the 
Voice assigned to the current Part. If the Drum Voice or 
Sample Voice is assigned to the current Part, this button 
does not appear and the Mixing Voice is not available. 

Audio Input settings—[F2] Audio

From this display you can set parameters related to audio 
input from the [A/D INPUT] connector and the mLAN 
connector (available for the MOTIF XS8 and available for 
the MOTIF XS6/7 with the mLAN16E2 installed). The basic 
parameters for creating a Song are gathered on this 
display from the Audio In display (page 234) in the Mixing 
Common Edit mode. The settings made here will be 
applied to the same parameters on the displays in the 
Mixing Common Edit mode, and vice versa. 

1

Part 

(Indication only)

Indicates the Part numbers. 

AD (A/D Input Part)

Lets you set parameters related to audio input from the A/D 
INPUT connector. 

mL (mLAN)

Lets you set parameters related to audio input from the mLAN 
connector (available for the MOTIF XS8 and available for the 
MOTIF XS6/7 with the mLAN16E2 installed). The audio signal 
here is transmitted from the computer via mLAN Ports 3 and 4.

The settings made here are automatically applied to the 
corresponding parameters in the Part 1 – 16 display 
(page 231). 

2

Rev Send (Reverb Send)

3

Cho Send (Chorus Send)

4

Pan

5

Ins FX Sw (Insertion Effect Switch)*

6

Volume

* Available for the A/D Input Part only

1

3
4

5

6

2

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

StattQualm SQuape Quick Start Manual preview
SQuape
Бренд: StattQualm Страницы: 5
Macally BTWKEYMB User Manual preview
BTWKEYMB
Бренд: Macally Страницы: 14
Genius LuxeMate 810 Media Cruiser Quick Manual preview
LuxeMate 810 Media Cruiser
Бренд: Genius Страницы: 5
Samsung SDS S-PATCH3-Cardio User Manual preview
S-PATCH3-Cardio
Бренд: Samsung SDS Страницы: 28
Yamaha Clavinova CVP-309 Installation Manual preview
Clavinova CVP-309
Бренд: Yamaha Страницы: 14
Yamaha CLAVINOVA CVP-501 Connection Manual preview
CLAVINOVA CVP-501
Бренд: Yamaha Страницы: 22
Yamaha Clavinova CVP-3 Owner'S Manual preview
Clavinova CVP-3
Бренд: Yamaha Страницы: 22
Yamaha Clavinova CVP-50 Owner'S Manual preview
Clavinova CVP-50
Бренд: Yamaha Страницы: 40
Yamaha Clavinova CVP-25 (French) Mode D'Emploi preview
Clavinova CVP-25
Бренд: Yamaha Страницы: 52
Yamaha Clavinova P-500 Owner'S Manual preview
Clavinova P-500
Бренд: Yamaha Страницы: 64
Yamaha Clavinova CLP-970 Owner'S Manual preview
Clavinova CLP-970
Бренд: Yamaha Страницы: 114
Yamaha Clavinova CVP-103M Service Manual preview
Clavinova CVP-103M
Бренд: Yamaha Страницы: 133
Yamaha Clavinova CVP-103M Owner'S Manual preview
Clavinova CVP-103M
Бренд: Yamaha Страницы: 178
Yamaha Clavinova CVP-403 Owner'S Manual preview
Clavinova CVP-403
Бренд: Yamaha Страницы: 226
Yamaha Clavinova CVP-307 Owner'S Manual preview
Clavinova CVP-307
Бренд: Yamaha Страницы: 224
TYPHOON Gsmosphere TI001 User Manual preview
Gsmosphere TI001
Бренд: TYPHOON Страницы: 10
iQOS 3 DUO User Manual preview
3 DUO
Бренд: iQOS Страницы: 13
Cortek Gammec XSniper Quick Manual preview
Gammec XSniper
Бренд: Cortek Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды