manualshive.com logo in svg

Yamaha MOTIF XS6, Руководство пользователя

Прежде чем начать использовать Ваш синтезатор Yamaha MOTIF XS6, убедитесь, что у Вас есть Owner's Manual для этой модели. Вы можете скачать его бесплатно на manualshive.com и ознакомиться с подробной информацией о функциях и настройках этого удивительного инструмента.

Поделиться
Скачать
background image

Song Recording

MOTIF XS Owner’s Manual

189

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf

ormance

 mode

Sampling

 mode 1

Sampling

 mode 2

Ref

erence

Arpeggio Settings—[F2] Arpeggio

From this display you can set various Arpeggio-related 
parameters for the Song recording. 

Parameters 

1

 – 

&

 are same as the ones in the Arpeggio 

Main display (page 101) in the Voice Common Edit mode. 

*

Voice with ARP (Voice with Arpeggio)

Each Arpeggio type is assigned a specific Voice best 
suited to the type. When an Arpeggio type has been 
assigned to a recorded track, this parameter determines 
whether or not the Voice assigned to the Arpeggio type will 
also be used for the recorded track. When set to “on,” the 
appropriate Voice is assigned to the recorded track in 
place of the currently assigned Voice. When set to “off,” the 
appropriate Voice is not assigned to the recorded track. 
The currently assigned Voice is maintained. The name of 
the Voice registered to the Arpeggio Type is shown at the 
right side. 

Settings:

off (not copied), on (copied)

The Arpeggio type set in the Arpeggio display of the Song 
Record can be called up together with the Song Scene via 
the [SF1] Scene 1 – [SF5] Scene 5 buttons in the Setup 
display (page 187) and the Track View display (page 181). 
The 8th note icon at right of Scene1 – 5 in the tab indicates 
that the Song Scene is registered to the corresponding 
button. If the Arpeggio Type is set to “off” in the Arpeggio 
display of the Song Record, pressing the corresponding 
Sub Function button in the Setup display/Track View 
display will not change the Arpeggio type even if the 8th 
note icon is shown.

Realtime Recording Procedure

This section explains how to record your performance 
using the Realtime Recording features. Please keep in 
mind that the procedure differs depending on the Record 
Type and Record Track set from the Record Setup display. 

[SONG] 

➞

 [

I

] (Record) 

➞

 Record track selection

➞

 Type=replace 

➞

 [

F

] (Play)

By using this method, any previous data in the recorded 
track will be erased (overwritten) and replaced by the new 
data. The first recording is lost, and the new one takes its 
place. This is handy when you need to re-record the same 
Part several times. 

n

If you accidentally overwrite important data when using 
Replace Recording, cancel the recording by using the Undo/
Redo Job (page 196). 

This section covers how to record your keyboard 
performance data to tracks 1 – 16 with Replace Recording. 

1

Press the [SONG] button to call up the Song 
Play display (page 178), then select a Song to 
be recorded. 

Select an empty Song if you wish to create a new Song 
from scratch. 

2

Press the [

I

] (Record) button to call up the 

Record Setup display (page 187). From this 
display, set the Record track to one of 1 – 16 
then set the Recording type to “replace.” 

If necessary, set various parameters such as tempo, 
time signature, measure, quantize, and voice. 

3

Press the [F5] Click button to turn the Click on 
when you wish to use the metronome. 

In the Click display (page 270) called up via the [SEQ 
SETUP] button, you can make various settings for the 
metronome click, such as the note resolution, volume, 
and lead-in count for recording. 

4

Press the [

F

] (Play) button so that its indicator 

flashes, then start recording after the count-in. 

Play the keyboard and/or controller to record. 

5

Press the [

J

] (Stop) button to stop recording 

and return to the Song Play display. 

Calling up the Arpeggio Type by using the 
[SF1] Scene 1 – [SF5] Scene 5 buttons

1

2

6

3

4

5

*

!

@

#

$

)

9

%

^

8

7

Replace Recording

Recording Procedure for individual tracks 
1 – 16

Содержание MOTIF XS6

































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF XS6

Jawbone UP Getting Started Manual preview
UP
Бренд: Jawbone Страницы: 3
Qoltec 7991 Installation & User Manual preview
7991
Бренд: Qoltec Страницы: 5
Kinesis Gaming Freestyle Edge KB975 Series Programming Manual preview
Freestyle Edge KB975 Series
Бренд: Kinesis Gaming Страницы: 10
CH Products Multi Function Panel USB Quick Start Manual preview
Multi Function Panel USB
Бренд: CH Products Страницы: 2
IMMAX NEO ZIGBEE 3.0 User Manual preview
NEO ZIGBEE 3.0
Бренд: IMMAX Страницы: 2
Manhattan 177771 Brochure & Specs preview
177771
Бренд: Manhattan Страницы: 2
Korg i2 HD Installation Manual preview
i2 HD
Бренд: Korg Страницы: 11
Qwerkytoys USB-C Edition QWERKYWRITER S Manual preview
USB-C Edition QWERKYWRITER S
Бренд: Qwerkytoys Страницы: 12
Hamlet XRFKEYPADTV User Manual preview
XRFKEYPADTV
Бренд: Hamlet Страницы: 6
Yamaha Portatone PSR-172 Service Manual preview
Portatone PSR-172
Бренд: Yamaha Страницы: 16
Yamaha PortaTone PSR-15 Owner'S Manual preview
PortaTone PSR-15
Бренд: Yamaha Страницы: 16
Yamaha PortaTone PSR-16 Owner'S Manual preview
PortaTone PSR-16
Бренд: Yamaha Страницы: 20
Yamaha PORTATONE PSR-190 Owner'S Manual preview
PORTATONE PSR-190
Бренд: Yamaha Страницы: 26
Yamaha PortaTone PSR-180 Owner'S Manual preview
PortaTone PSR-180
Бренд: Yamaha Страницы: 26
Yamaha PortaTone PSR-185 Owner'S Manual preview
PortaTone PSR-185
Бренд: Yamaha Страницы: 28
Yamaha PortaTone PSR-150 Product Manual preview
PortaTone PSR-150
Бренд: Yamaha Страницы: 26
Yamaha Portatone PSR-18 (Japanese) User Manual preview
Portatone PSR-18
Бренд: Yamaha Страницы: 36
Yamaha PortaTone PSR-195 (French) Mode D'Emploi preview
PortaTone PSR-195
Бренд: Yamaha Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды