manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

Voice Mode

MOTIF-RACK XS Owner’s Manual

30

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

n

Operating the knobs may have little to no effect on certain voices.

n

The Multi mode features the same parameter-to-knob assignments as the Voice mode.

Functions of Knobs 1 – 5 

4

3

1

2

Knob 1

Knob 2

Knob 3

Knob 4

Knob 5

1

 When the 1st lamp is turned on:

Moving Knobs 1 and 2 changes the Filter parameters on the Filter display (pages 68, 83, and 96). 
Moving Knob 3 changes one of the FEG parameters on the EG display (pages 68 and 96). Moving 
Knobs 4 and 5 changes two of the parameters on the Play Mode display (pages 65, 83 and 94).

Knob 1

CUTOFF

Raises or lowers the Filter Cutoff Frequency (pages 68 and 96) to adjust the tone brilliance.

Knob 2

RESONANCE

Raises or lowers the Resonance (pages 68 and 96) to boost the level of the signal in the area of the 
cutoff frequency. By emphasizing the overtones in this area, this can produce a distinctive “peaky” 
tone, making the sound brighter and harder.

Knob 3

FEG DEPTH (Filter EG Depth)

Raises or lowers the Filter EG Depth (pages 68 and 96) to change the range of the cutoff 
frequency. When a Drum Voice is selected, this parameter cannot be set.

Knob 4

PORTAMENTO

Raises or lowers the Portamento Time (pages 65 and 95) to determine the pitch transition time or 
the speed of the pitch change when Portamento is applied. If you continue turning the knob toward 
the left, this parameter setting will turn “off” and set the “Porta Sw (Portamento Switch)” to “off.”

Knob 5

VOLUME

Sets the volume of the Voice (pages 65 and 94).

2

 When the 2nd lamp is turned on:

Moving Knobs 1 – 4 changes the AEG parameters on the EG display (pages 68, 83, and 96). 
Moving Knob 5 changes one of the parameters on the Play Mode display (pages 65, 83, and 94). 

Knob 1

ATTACK (AEG Attack Time)

Increases or decreases the AEG Attack Time (pages 69 and 96) of the current Voice to adjust the 
attack rate. Positive values increasingly slow down the attack rate, while negative values speed it 
up.

Knob 2

DECAY (AEG Decay Time)

Increases or decreases the AEG Decay Time (pages 69 and 96) of the current Voice, controlling 
how fast the volume falls from maximum attack level to the sustain level. The smaller the value, the 
faster the decay.

Knob 3

SUSTAIN (AEG Sustain Level)

Increases or decreases the AEG Sustain Level (pages 69 and 96) at which the volume will 
continue while a key is held, after the initial attack and decay. When a Drum Voice is selected, this 
parameter cannot be set.

Knob 4

RELEASE (AEG Release Time)

Increases or decreases the AEG Release Time (pages 69 and 96) of the sound, controlling the 
time that the volume falls from the sustain level to zero when a Note Off message is received. When 
a Drum Voice is selected, this parameter cannot be set.

Knob 5

PAN

Adjusts the stereo pan position of the current Voice (pages 65 and 94).

3

 When the 3rd lamp is turned on:

Moving Knobs 1 – 5 changes the parameters on the 3 Band EQ display (pages 71 and 83)/ Part 
EQ display (page 96). 

Knob 1

EQ LOW (EQ Low Gain)

Increases or decreases the EQ Low Gain (pages 71 and 96) to change the sound.

Knob 2

EQ MID F (EQ Middle Frequency)

Increases or decreases the EQ Middle Frequency (pages 71 and 96) around which the band is 
adjusted via Knob 3 (EQ MID).

Knob 3

EQ MID (EQ Middle Gain)

Increases or decreases the EQ Middle Gain (pages 71 and 96) to change the current Voice.

Knob 4

EQ MID Q (EQ Middle Q)

Increases or decreases the EQ Middle Q (pages 71 and 97) to change the width of the band over 
which you can adjust the gain via Knob 3 (EQ Middle Gain). Turning Knob 4 clockwise increases 
the Q value to reduce the band width. Turning Knob 4 counter-clockwise decreases the Q value to 
widen the band width.

Knob 5

EQ HIGH (EQ High Gain)

Increases or decreases the EQ High Gain (pages 71 and 96) to change the current Voice.

4

 When the 4th lamp is turned on:

Moving Knobs 1 and 2 changes parameters on the Effect display (pages 72 and 83)/ Fx Send 
display (page 97). Moving Knobs 3 and 4 changes parameters on the Control display (pages 71, 
83, and 93). Moving Knob 5 changes one of the parameters on the Arp Edit display (page 66) or 
Arpeggio display (page 91).

Knob 1

CHORUS (Chorus Send)

Adjusts the Chorus Send Level (pages 72 and 83).

Knob 2

REVERB (Reverb Send)

Adjusts the Reverb Send Level (pages 72 and 83).

Knob 3

ASSIGN 1 (Assign 1 value)

A variety of functions can be assigned to these Knobs. Turning the Knob can edit the value of the 
function assigned to the Knob as offset. You can confirm the functions currently assigned to these 
Knobs in the Control display (pages 71 and 93) in the Voice Common Edit / Multi Common Edit.

Knob 4

ASSIGN 2 (Assign 2 value)

Knob 5

TEMPO (Arpeggio Tempo)

Adjusts the tempo for the Arpeggio playback (pages 66 and 91).

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

FEKER Alice 80 User Manual preview
Alice 80
Бренд: FEKER Страницы: 4
Avigilon ACC-USB-JOY-PRO Installation Manual preview
ACC-USB-JOY-PRO
Бренд: Avigilon Страницы: 13
iQOS lil SOLID 2.0 User Manual preview
lil SOLID 2.0
Бренд: iQOS Страницы: 40
KROM Kael User Manual preview
Kael
Бренд: KROM Страницы: 16
Epomaker MINI CAT64 Quick Start Manual preview
MINI CAT64
Бренд: Epomaker Страницы: 18
Technics SX-KN200 Owner'S Manual preview
SX-KN200
Бренд: Technics Страницы: 19
M-Audio OXYGEN PRO 25 User Manual preview
OXYGEN PRO 25
Бренд: M-Audio Страницы: 114
A4Tech GR-152 User Manual preview
GR-152
Бренд: A4Tech Страницы: 8
Lexking Jupiter Series User Manual preview
Jupiter Series
Бренд: Lexking Страницы: 6
Flybox Vigilus Operating Manual preview
Vigilus
Бренд: Flybox Страницы: 92
Trust Slimline KB-1800S Manual preview
Slimline KB-1800S
Бренд: Trust Страницы: 2
BH HI POWER SK2000T Manual preview
SK2000T
Бренд: BH HI POWER Страницы: 29
Yihi SXmini SL Class User Manual preview
SXmini SL Class
Бренд: Yihi Страницы: 75
HYPE HY-1022-MINI User Manual preview
HY-1022-MINI
Бренд: HYPE Страницы: 21
Adaptiv Adaptiv Mini Fitting & User Manual preview
Adaptiv Mini
Бренд: Adaptiv Страницы: 4
Atek OnBoard User Manual preview
OnBoard
Бренд: Atek Страницы: 33
Natec Genesis RX66 User Manual preview
Genesis RX66
Бренд: Natec Страницы: 15
Natec FELIMARE User Manual preview
FELIMARE
Бренд: Natec Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды