manualshive.com logo in svg

Yamaha MOTIF ES6, Руководство пользователя

Yamaha MOTIF ES6 - электронная рабочая станция, предназначенная для музыкантов и звукорежиссеров. Получите бесплатное руководство по установке программного обеспечения и другие мануалы на manualshive.com. Просто загрузите их, чтобы начать использование всех функций этого впечатляющего устройства.

Поделиться
Скачать
background image

Refer

ence

  P
attern Mode

Pattern Job mode    

    

246

Owner’s Manual

06: Get Phrase From Song

This Job copies a segment of sequence-track data from 
a Song into the designated destination phrase.
After specifying the source Song/track/range of 
measures to be copied, the destination phrase, and 
setting the checkbox of Copy Sample, press the 
[ENTER] button to execute this Job. 
When the Copy Sample box is checkmarked, Sample 
Voices used by the source track are copied to the 
destination Pattern as Sample Voices, and are assigned 

to the destination phrase. This parameter has no effect when no Sample Voice is used by the source track.

n

When there is no memory available in the destination Pattern for Sample Voice data, an error message will appear on the 
display and the Sample Voice data will not be copied. If this occurs, use Sample Job 02 “Delete” to delete any unused 
samples, then try again.

The Job overwrites any data already existing in the destination phrase.

Undo/Redo (page 244) cannot be used to undo/redo a Sample Voice copy operation.

07: Put Phrase To Song

This Job copies a selected user phrase into a specified 
area of a selected song.
After specifying the source phrase, destination Song/
track/top measure, and setting the Copy Sample 
checkbox, press the [ENTER] button to execute this 
Job. 
When the Copy Sample box is checkmarked, Sample 
Voices used by the source phrase are copied to the 
destination Song as Sample Voices, and are assigned 

to the destination Song track. This parameter has no effect when no Sample Voice is used by the source phrase.

n

When there is no memory available in the destination Song for Sample Voice data, an error message will appear on the display 
and the Sample Voice data will not be copied. If this occurs, use Sample Job “Delete” to delete any unused samples, then try 
again.

The Job overwrites any data already existing in the destination track.

Undo/Redo (page 244) cannot be used to undo/redo a Sample Voice copy operation.

08: Clear Phrase

This Job deletes all data from the selected phrase.
When the Delete Sample box is checkmarked, sample data assigned to the selected phrase will be deleted. This 
parameter has no effect when no Sample Voice is used by the selected phrase.

Undo/Redo (page 244) cannot be used to undo/redo a Delete Sample operation.

09: Phrase Name

This Job lets you assign a name (of up to eight characters) to the selected phrase.
For instructions on naming, refer to page 53 in the Basic Operation section. 

[F5] TRACK (Track Job)

01: Copy Track

This Job copies all data from a specified source track to 
the specified destination track. 
The types of data to be copied are the same as in the 
Song Job mode. See page 231. 

02: Exchange Track

This Job exchanges or “swaps” the specified type of 
data between two specified tracks in the current Pattern 
and section. The types of data to be exchanged are the 
same as in the Song Job mode. See page 232. 

03: Clear Track

This Job deletes all data of the selected type from the 
selected Pattern track. 
The types of data to be cleared are the same as in the 
Song Job mode. See page 232. 

Source Song, track, and range of measures 
to be copied.

Destination phrase

CAUTION

CAUTION

Source phrase

Destination Song, track, 
and top measures

CAUTION

CAUTION

CAUTION

Source Pattern, section, and track

Types of data to be copied

Destination Pattern, section, 
and track

Target tracks for the Exchange operation

Types of data to be exchanged

Section and track from which data is to be cleared

Types of data to be cleared

Содержание MOTIF ES6













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF ES6

Logitech 920-000324 - USB Keyboard For PlayStation 3 Wired Setup Manual preview
920-000324 - USB Keyboard For PlayStation 3 Wired
Бренд: Logitech Страницы: 2
Volkswagen 3C0 054 630 Assembly Instructions Manual preview
3C0 054 630
Бренд: Volkswagen Страницы: 44
Denver GKK330 Manual preview
GKK330
Бренд: Denver Страницы: 21
Dr.Dabber aura User Manual preview
aura
Бренд: Dr.Dabber Страницы: 13
Fujitsu FPCKB51A1P User Manual preview
FPCKB51A1P
Бренд: Fujitsu Страницы: 20
Fujitsu B6FY-0701-01EN-00 User Manual preview
B6FY-0701-01EN-00
Бренд: Fujitsu Страницы: 8
Fujitsu FKB1406 Series Specifications preview
FKB1406 Series
Бренд: Fujitsu Страницы: 4
Fujitsu FKB8735 Series Specifications preview
FKB8735 Series
Бренд: Fujitsu Страницы: 6
Fujitsu FKB7401 Series Specifications preview
FKB7401 Series
Бренд: Fujitsu Страницы: 5
Fujitsu FKB7614 SERIES Specifications preview
FKB7614 SERIES
Бренд: Fujitsu Страницы: 4
Panasonic SXKC611 - ELECTRONIC KEYBOARD Owner'S Manual preview
SXKC611 - ELECTRONIC KEYBOARD
Бренд: Panasonic Страницы: 52
Panasonic SXPR703 - ENSEMBLE PIANO Operating Manual preview
SXPR703 - ENSEMBLE PIANO
Бренд: Panasonic Страницы: 124
Panasonic SXPR703 - ENSEMBLE PIANO Service Manual preview
SXPR703 - ENSEMBLE PIANO
Бренд: Panasonic Страницы: 127
Panasonic SXKN1500 - ELECTRONIC KEYBOARD Owner'S Manual preview
SXKN1500 - ELECTRONIC KEYBOARD
Бренд: Panasonic Страницы: 136
Hamlet XRFKEYPADTV User Manual preview
XRFKEYPADTV
Бренд: Hamlet Страницы: 6
WeGo Relay User Manual preview
Relay
Бренд: WeGo Страницы: 19
Sven Comfort 7400 EL User Manual preview
Comfort 7400 EL
Бренд: Sven Страницы: 5
Sven comfort 3050 User Manual preview
comfort 3050
Бренд: Sven Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды