Yamaha MO6, Руководство пользователя

Страница: 56 / 240

Quic
k Guide
Editing a Pr
ogram
Editing a Voice
56 Owner’s Manual
Editing a Voice by using the Knobs
The four knobs at the top left of the instrument are not only for tweaking the sound while you perform—you can also
use them to edit a Voice, either in the Voice Play mode or the Voice Edit mode.
●
When the [PAN/SEND] indicator is turned on:
●
When the [TONE] indicator is turned on:
n
The settings above are applied as offsets to the AEG and FEG settings in the Voice Edit mode.
●
When the [ARP FX] indicator is turned on:
●
When the [EQ] indicator is turned on:
n
The settings above are applied as offsets to the EQ settings in the [VOICE]
→
[UTILITY]
→
[F3] VOICE
→
[SF1] MEQ display.
●
When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
n
In addition to above functions, Master Effect related parameters (set in the [UTILITY]
→
[F3] VOICE
→
[SF2] MEF display) can be assigned to
these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular parameters assigned to the four knobs can be set
in the [UTILITY]
→
[F4] CTL ASN
→
[SF5] MEF display.
Editing a Voice by using the Control sliders
In the Voice mode, the four Control sliders let you independently adjust the levels of the Elements of a Normal Voice or
the Drum Voice keys. When a Normal Voice is selected, you can adjust the level balance among the four Elements.
n
Inadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.
PAN Determines the stereo pan position of the Voice. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F2] OUTPUT
→
Pan
Page 154
REVERB Determines the amount of Reverb effect that is applied to the Voice. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F2] OUTPUT
→
RevSend
Page 154
CHORUS Determines the amount of Chorus effect that is applied to the Voice. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F2] OUTPUT
→
ChoSend
Page 154
TEMPO Determines the tempo of the Arpeggio assigned to the currently selected Voice. [VOICE]
→
Voice selection
→
[F6] ARP
→
Tempo Page 154
CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance. [VOICE]
→
Voice selection
→
[F5] EG
→
CUTOF Page 152
RESONANCE Boosts or attenuates the level at the area around the Filter cutoff
frequency. [VOICE]
→
Voice selection
→
[F5] EG
→
RESO Page 152
ATTACK Determines the attack time of the sound. For example, you can adjust a
strings Voice so that the sound gradually swells in volume by setting a
slow attack time – simply turn this knob to the right. [VOICE]
→
Voice selection
→
[F5] EG
→
ATK (AEG) Page 152
RELEASE Determines the release time of the sound. Turning the knob to the right
sets a long release time and (depending on the selected Voice) lets the
sound sustain after the key is released. To produce a sharp release, in
which the sound abruptly cuts off, set a short release time. [VOICE]
→
Voice selection
→
[F5] EG
→
REL (AEG) Page 152
SWING Adjusts the swing feel of the Arpeggio playback. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F3] ARP
→
[SF3] PLAY FX
→
Swing
Page 155
GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F3] ARP
→
[SF3] PLAY FX
→
GateTimeRate
Page 155
VELOCITY Adjusts the velocity of the Arpeggio notes. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F3] ARP
→
[SF3] PLAY FX
→
VelocityRate
Page 155
UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F3] ARP
→
[SF3] PLAY FX
→
UnitMultiply
Page 155
LO Determines the amount of boost or attenuation applied to the low
frequency band of the Master EQ. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F1] GENERAL
→
[SF3] MEQ OFS
→
LOW
Page 153
LO MID Determines the amount of boost or attenuation applied to the low-
midrange frequency band of the Master EQ. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F1] GENERAL
→
[SF3] MEQ OFS
→
LOW MID
Page 153
HI MID Determines the amount of boost or attenuation applied to the high-
midrange frequency band of the Master EQ. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F1] GENERAL
→
[SF3] MEQ OFS
→
HIGH MID
Page 153
HI Determines the amount of boost or attenuation applied to the high
frequency band of the Master EQ. [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F1] GENERAL
→
[SF3] MEQ OFS
→
HIGH
Page 153
ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY]
→
[F4] CTL ASN
→
[SF2] ASSIGN display. Page 71
ASSIGN B
ASSIGN 1 Adjusts parameters assigned to these knobs in the [VOICE]
→
Voice selection
→
[EDIT]
→
[COMMON]
→
[F4] CTL SET display. Page 70
ASSIGN 2
[VOICE]
➞
Voice selection
➞
[EDIT]
➞
Element selection
➞
[F4] AMP
➞
[SF1] LVL/PAN
➞
Level
TIP
TIP