Yamaha MO6, Руководство пользователя

Страница: 29 / 240

Basic Operation
Modes
29 Owner’s Manual
Keyboard octave setting (MO6)
Sometimes when playing a voice, you may wish to play in a lower or higher pitch range. For example, you may want to shift
the pitch down lower to get extra bass notes, or shift up to get higher notes for leads and solos. The Octave Up/Down
controls let you do this quickly and easily. Each time you press the [OCTAVE UP] button on the panel, the overall pitch of the
voice goes up by one octave. Likewise, each press of the [OCTAVE DOWN] button takes the pitch down by one octave. The
range is from -3 to +3, with 0 being standard pitch. When this is set to Octave Up, the lamp of the [OCTAVE UP] button lights,
and when it is set to Octave Down, the [OCTAVE DOWN] button’s lamp lights. The current octave setting is shown at the top
right of the display. You can instantly restore standard pitch (0) by simultaneously pressing both the [OCTAVE UP] button
and the [OCTAVE DOWN] button (both lamps turn off).
n
The Octave setting made here is automatically reflected in the identical Octave parameter in the Utility mode ([UTILITY]
→
[F1] GENERAL
→
[SF2]
KBD
→
Octave). This setting is available in all modes.
Transpose setting of the keyboard
You can set the amount in semitones by which the range of the keyboard is shifted up or down as well as the octave setting.
Make sure to execute step 5. The settings made in step 4 will be lost if
you turn the power off without executing step 5.
Never attempt to turn off the power while data is being written to Flash
ROM (while a “Please keep power on” message is shown). Turning the
power off in this state may not only cause the system to freeze (due to
data corruption in the Flash ROM) and prevent normal startup the next
time the power is turned on, it may also result in loss of all user data.
n
The transpose setting is available in all modes.
OCTAVE
DOWN UP
1
Press the [UTILITY] button to enter the Utility
mode.
2
Press the [F1] GENERAL button, then the
[SF2] KBD button.
VOICE PERFORM MASTER
SONG PATTERN
DAW
REMOTE
EDIT
COMPARE SCENE STORE
SET LOCATE
FILE
JOB
UTILITY
DEMO
STORE
MODE
MIXING
F1 F2 F3 F4 F5 F6
SF1
SCENE
SF2 SF3 SF4 SF5 INFORMATION
3
Move the cursor to “Transpose” by using the
Cursor button.
4
Change the Transpose value by using the
[INC/YES], [DEC/NO] buttons and data dial.
5
Press the [STORE] button to store the
Transpose setting to internal Flash ROM.
CAUTION
CAUTION