39
Error Messages
Failed to set Sample Rate.
When the node represents a computer:
Shut down your DAW, make the necessary settings
in Graphic Patchbay, then start the DAW (page 22).
Some parameters cannot be changed while the DAW
or editor application using the mLAN driver is
running.
Failed to set the node as the wordclock
master.
When the node represents an mLAN device:
Make sure all cables are securely and correctly
connected to mLAN devices, and the power to the
mLAN devices is turned on.
Failed to change the number of audio
output channels for the next node. (Node
nickname, or device model name if a
nickname has not been specified.)
Make sure that the wordclock and sampling
frequency settings on the corresponding mLAN
device are correct.
Failed to set the number of MIDI output
ports.
Failed to connect audio.
Failed to connect wordclock.
The sampling rate (Sample Rate) setting
differs from that specified on the device.
Set the sampling rate correctly.
Set the sampling rate of the audio node in the Node
Information (Audio) window (page 19).
Found an mLAN device not compatible
with S400.
The number of available channels will
decrease.
You may need to reduce the number of
transmission channels to be able to make
mLAN connections.
For more information, refer to “Error
Messages” or “Troubleshooting” in the
mLAN Graphic Patchbay Online Manual.
If you connect even a single mLAN device that does
not support S400, all other mLAN devices in the
network will match the functions and limitations of
the non-S400-compatible device. For example, if
you connect an S400-compatible device and an
S200-compatible device in a network, the S400-
compatible device will conform to the performance
of the S200-compatible device. Therefore, the
number of transmission channels on each device will
be limited. (See the table below.)
Windows
*1
Macintosh
2
3
4
5
40
44
37
32
*2
40
56
49
43
Number of transmission channels available in a network that includes a
single S200-compatible device and multiple S400-compatible devices:
Total number of available transmission channels
(with a sampling frequency of 44.1 kHz or 48 kHz)
*1. Applicable if the number of transmission channels on the computer is 32, except if the number
of mLAN devices is five.
*2. The number of available transmission channels on the computer is limited to 24.
Number of mLAN devices
(including the computer)