MG10/2
3
Frequency Characteristics (ST OUT)
20 Hz-20 kHz +1 dB, -3 dB @+4 dBu, 10 k
Ω
(with gain control at maximum level)
Total Harmonic Distortion (ST OUT)
0.1 % (THD+N) @+14 dBu, 20 Hz-20 kHz, 10 k
Ω
(with gain control at maximum level)
(CHs 1 and 2)
-128 dBu
Equivalent input noise (CHs 1 and 2)
-100 dBu
Residual output noise (ST OUT)
Hum and Noise
1
-87 dBu (91 dB S/N)
ST, Master fader at nominal level and all Ch at minimum level.
-85 dBu (89 dB S/N)
All channel mix controls at minimum level.
-64 dBu (68 dB S/N)
ST, Master fader and one Ch fader at nominal level.
(CHs 1 and 2)
60 dB CH MIC INPUT
→
CH INSERT OUT
76 dB CH MIC INPUT
→
ST OUT
64.2 dB CH MIC INPUT
→
REC OUT
70 dB CH MIC INPUT
→
AUX SEND1 (PRE)
76 dB CH MIC INPUT
→
AUX SEND2 (POST)
Maximum Voltage Gain
2
76 dB ST CH MIC INPUT
→
ST OUT
50 dB ST CH LINE INPUT
→
ST OUT
41 dB ST CH LINE INPUT
→
AUX SEND1 (PRE)
47 dB ST CH LINE INPUT
→
AUX SEND2 (POST)
26 dB ST CH INPUT
→
ST OUT
12 dB AUX RETURN
→
ST OUT
23.8 dB 2TR INPUT
→
ST OUT
Monaural/Stereo Input Gain Control
44 dB variable
Monaural/Stereo High Pass Filter
80 Hz 12 dB/octave
Crosstalk (1 kHz)
-70 dB between input channels
-70 dB between input/output channels (CHs 1 to 6)
+/-
15 dB
Monaural/Stereo Input Channel Equalization:
HIGH 10 kHz shelving
Max. Variation
3
MID 2.5 kHz peaking
LOW 100 Hz shelving
Monaural/Stereo Input Peak Indicator
On each channel: red indicator lights if post-EQ signal (on ST channels, if either post-EQ sig-
nal or post-mic-amp signal) comes within 3 dB of the clipping level.
Two 12-point LED meters [Stereo (L, R)]
Level Meters
Peak point: red indicator
+5, +3, +1, and 0 points: yellow indicators
-1, -3, -5, -7, -10, -15, -20: green indicators
P48 VDC Power (Balanced input)
Supplied when P48 V switch is ON.
Included Accessory
Power adaptor (PA-10)
Option
Microphone-stand adaptor (BMS-10A)
USA and Canada:
120 V AC, 60 Hz
Europe:
230 V AC, 50 Hz
Power Supply
Australia:
240 V AC, 50 Hz
Korea:
220 V AC, 60 Hz
China:
220 V AC, 50 Hz
Power Consumption
19 W
Max. Dimensions (W x H x D)
251 x 65 x 290.5 mm
Weight
1.8 kg
■
General Specifications
1
Measured with 12.7 kHz, -6 dB/oct. low pass filter (equivalent to 20 kHz, -
∞
filter).
(CH MIC INPUT to ST, AUX, EFFECT SEND)
2
Turning PAN/BAL to left or right.
3
Shelving turnover/rolloff frequency: 3 dB before maximum cut or boost.
Where 0 dBu = 0.775V and 0 dBV = 1 V
■
SPECIFICATIONS
