MG166CX-USB/MG166CX/MG166C-USB/MG166C
51
3.
Others
Execute each test with controls set effective.
3-1
Effect (MG166CX-USB, MG166CX)
Check the effect program [1], [6], [11] and [16] are effective respectively.
Check the output signal can be controlled with the parameter volume in each effect program.
Check the allophone can not be heard when the program is changed.
3-2
PHANTOM
Connect a 10 k
Ω
load resistance between pin 1 and pin 2 of the INPUT A or MIC terminal and short-circuit pin 2 and pin 3.
Then turn on the PHANTOM switch and check the PHANTOM indicator lights up and the voltage between pin 1 and pin 2 is
b33 V and +37 V.
4.
Settings for shipping
4-1
Factory Settings
•
Equalizer gain control (HIGH, MID, LOW)
: Center (0)
•
PAN, PAN/BAL, BAL control
: Center
•
Other VR controls
: Minimum
•
Faders
: Minimum
•
Lock-push switches
: OFF
•
PROGRAM select switch
: 1 (MG166CX-USB, MG166CX)
•
ON/STANDBY switch (on rear side)
: STANDBY