Yamaha MFC 10, Руководство пользователя

Страница: 35 / 44

33
1.5.3 Status byte FE
FE (active sensing) is transmitted in 255 msec steps.
If no data is received within 350 msec from the first
reception of FE, the MFC10 will stop FE data transmis-
sion within 500 msec.
2 Bulk dump
Bulk dump can be received in the both Play and Edit
mode.
The contents of the Program memory, Function memory
or Foot Controller can be transmitted.
Dump request does not receive.
2.1 All memory data bulk dump
0 11110000 F0
1 01000011 43
2 00000000 00= Device Number(Fixed)
3 01111010 7A
4 0bbbbbbb BB= Byte Count
5 0bbbbbbb BB
6 01001100 4C(ascii”L”)
7 01001101 4D(ascii”M”)
8 00100000 20(ascii” ”)
9 00100000 20(ascii” ”)
10 00110000 30(ascii”0”)
11 00110010 32(ascii”2”)
12 00110111 37(ascii”7”)
13 00110001 31(ascii”1”)
14 01000001 41(ascii”A”)
15 01001100 4C(ascii”L”)
16 00000000 00
: : :
31 00000000 00
32 0ddddddd DD= Data
: : :
0sssssss SS= Check Sum
11110111 F7
Overwrites to the Program Change, Function, Foot Control-
ler memory when data is received.
2.2 Normal Mode Program memory data
bulk dump
0 11110000 F0
1 01000011 43
2 00000000 00= DeviceNumber(Fixed)
3 01111010 7A
4 0bbbbbbb BB= Byte Count
5 0bbbbbbb BB
6 01001100 4C(ascii”L”)
7 01001101 4D(ascii”M”)
8 00100000 20(ascii” ”)
1.3.2 Start/Stop Control
Start/Stop control data (stored in the Function Memory)
can be transmitted by using Foot Switch.
data: Reset Start =F0, 43, 6n, 7A, F7
Stop & Rewind =F0, 43, 6n, 7D, F7
Received data is also transmitted via the MIDI OUT.
1.3.3 Tempo Control
Tempo data (stored in the Function Memory) can be
transmitted by using Foot Switch.
Transmit data=F0, 43, 7E, 01, t4, t3, t2, t1, F7
Received data is also transmitted via the MIDI OUT.
1.4 System Common Message
1.4.1 Status byte F1, F2, F3, F6
F1, F2, F3 and F6 can only be received
F1: Time Chord
F2: Song Position pointer
F3: Song Select
F6: Tune Request
Received data is also transmitted via the MIDI OUT.
1.5 System Realtime Message
1.5.1 Status byte F8, FF
F8 or FF Status can only be received
F8: Timing Clock
FF: System Reset
Received data is also transmitted via the MIDI OUT.
1.5.2 Status byte FA, FB, FC
Stored data FA, FB or FC in the Function memory can be
transmitted by pressing the Foot Switch.
FA: Start
FB: Continue
FC: Stop
Received data is also transmitted via the MIDI OUT.