Yamaha MCX 1000 - MusicCAST - Digital Audio Server, Руководство пользователя

Страница: 135 / 148

Appendix
Appendix
135
■
Handling of discs
Heed the following notes on handling of discs to avoid any
cause for a recording failure, a loss of the recorded data, or a
malfunction of this unit.
• This compact disc recorder is designed for use with CDs
(including 8cm [3”] discs) bearing the , , or
marks only. Never attempt to load any other type of
disc into this unit.
• CDs are not subjected to wear during play. However if the
disc is handled improperly, damage may be created on the
disc to adversely affect the disc’s play.
• When writing on the label side of CD-R or CD-RW discs,
use an oil-based felt-tipped pen.
• Do not use cleaning discs or warped discs. All of these
could damage this unit.
• Although playback of CDs is generally not affected by
small particles of dust or fingerprints on their playing
surface, dust, fingerprints, small scratches and direct
sunlight on the recording surface of a CD-R or CD-RW
disc may make recording impossible. Therefore, for
optimal performance of the recorder and for long-term
enjoyment of your CD collection, handle discs correctly
as outlined in the following guidelines.
1. Hold discs by touching only the edges or center hole.
2. When a disc is not currently being used, remove it from
the recorder and store in an appropriate case.
3. With proper disc maintenance, cleaning should not be
necessary. However, should cleaning be required, wipe by
using a clean, dry cloth. Do not wipe with a circular
motion; wipe straight outward from the center.
• Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, antistatic spray or liquid, or any
other chemical-based liquid, because such substances
might irreparably damage the disc’s surface.
• Do not expose discs to direct sunlight, high temperature,
or high humidity for a long period of time, because this
might warp or otherwise damage the disc.
■
To prevent a malfunction of this unit
• Do not use any non-standard shaped CDs (heart, flower
shaped, etc.) available on the market, because they are off-
balance in their weight.
If a non-standard shaped CD is loaded into this unit, it
may create problems such as improper playback, opening
of the disc tray, usual noise, and this unit’s failure.
• Be sure to use a felt-tip pen or similar writing tool when
writing on the label side of the disc. Do not use a ball-
point pen, pencil, or other hard-tipped writing tool, as
these may damage the disc and may adversely affect
further recording on the disc.
• Do not use discs with glue left on their surface. They may
get stuck in this unit or create damage to this unit.
• When using an 8cm (3”) disc, do not place a normal 12cm
(5”) disc on top of it.
• Do not use discs printed with commercially available
label printers.
No!