Yamaha MBK MW125 2014, Руководство по обслуживанию

Страница: 374 / 380

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
9-7
EAS31121
DIAGNOSTIC CODE: ACTUATOR OPERATION TABLE
62 Malfunction history code era-
sure
• No history 00 —
• History exists • Displays the total number
of malfunctions, including
the current malfunction,
that have occurred since
the history was last erased.
(For example, if there have
been three malfunctions,
“03” is displayed.)
To erase the history, push the
start switch “
”.
67 ISC (idle speed control)
learning condition display
ISC (idle speed control)
learning data erasure 00
ISC (idle speed control)
learning data has been
erased.
01
It is not necessary to erase
the ISC (idle speed control)
learning data.
02
It is necessary to erase the
ISC (idle speed control)
learning data. To erase the ISC (idle speed
control) learning data, using
the Yamaha diagnostic tool.
70 Control number 0–254 [-] —
Diagnostic
code No.
Item Actuation Procedure
30 Ignition coil Actuates the ignition coil five
times at one-second inter-
vals.
Illuminates the engine trou-
ble warning light. Check that a spark is gener-
ated five times.
• Connect an ignition check-
er.
36 Injector Actuates the injector five
times at one-second inter-
vals.
Illuminates the engine trou-
ble warning light. Check that injector is actuat-
ed five times by listening for
the operating sound.
52 Headlight relay Actuates the headlight relay
five times at five-second in-
tervals. Illuminates the en-
gine trouble warning light. Check that the headlight re-
lay is actuated five times by
listening for the operating
sound.
54 ISC (idle speed control) unit Actuates and fully closes the
ISC valve, then opens it to
the standby opening position
when the engine is started.
This operation takes approxi-
mately 3 seconds until it is
completed. The ISC unit vibrates when
the ISC valve operates.
Diagnostic
code No.
Item Meter display Procedure