Yamaha MBK MW125 2014, Руководство по обслуживанию

Страница: 277 / 380

THERMOSTAT
6-6
EAS31248
CHECKING THE THERMOSTAT ASSEMBLY
1. Check:
• Thermostat “1”
Does not open at 80–84°C (178–183°F)
→
Replace.
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Suspend the thermostat “1” in a container “2”
filled with water.
b. Slowly heat the water.
c. Place a thermometer “3” in the water.
d. While stirring the water “4”, observe the ther-
mostat and thermometer’s indicated temper-
ature.
e. Check the thermostat element position “5”.
Same level for the thermostat element upper
end and the hole lower line “a” at 95 °C(203
°F)
TIP
If the accuracy of the thermostat is in doubt, re-
place it. A faulty thermostat could cause serious
overheating or overcooling.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
EAS30445
INSTALLING THE THERMOSTAT
ASSEMBLY
1. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” on
page 3-21.
2. Check:
• Cooling system
Leaks
→
Repair or replace any faulty part.
Refer to “INSTALLING THE RADIATOR” on
page 6-3.
3. Measure:
• Radiator cap opening pressure
Below the specified pressure
→
Replace the
radiator cap.
Refer to “CHECKING THE RADIATOR” on
page 6-3.
1
1
2
3
4
a
5
A. Fully closed
B. Fully open
B
A
82 ± 2.0˚C
95˚C
4.5 mm