Online Services
MARK IV INTERNET CONNECTION GUIDE
Connection Example
Wireless connection
*Here, "m odem" refers to an ADSL modem , optical network unit (ONU),
or cable m odem .
*Modem
Access point
Wireless bridge device
Ethernet cable
Instructions
PURCHASE A
COMPATIBLE LAN
BRIDGE DEVICE
Any LAN bridge compatible with your network should allow you to
connect your instrument wirelessly. However, the following devices
have been fully tested and are recommended for use with Yamaha
instruments:
LINKSYS WET610N
BUFFALO WLI-TX4-AG300N
You may need to refer to the manufacturer's instructions to
configure your adapter. A full list of compatible adapters is available
at the
Yamaha Download Site
.
CONFIGURE THE
BRIDGE ADAPTER
Set up your adapter to connect to your wireless network, following
the directions provided for your adapter. If you have any problems
connecting the bridge device to your network, please contact the
device manufacturer for further support.
ATTACH
ETHERNET CABLE
To your Disklavier
Attach one end of an Ethernet cable to the rear port of the bridge
adapter and the other end to the Ethernet port on your Disklavier.
PRESS
Press the [Internet] button. Congratulations, you are now
connnected. You should see the Internet Direct Connection home
page.
Still can't connect? Follow these instructions…
SS
If you see a screen saying that you are not successfully connected,
6/4/2011
Yamaha: Connect to Radio Service For …
…yamaha.com/connect/wirelessType?t…
1/2
