manualshive.com logo in svg

Yamaha M06, Руководство пользователя, Страница: 219 / 240

Поделиться
Скачать
Yamaha M06 Скачать руководство пользователя страница 219

219

Owner’s Manual

Information Displays

Appendix

Appendix

Information Displays

The convenient Information displays let you see at-a-glance some of the more important settings relevant to each mode. 
Select the desired mode, then press the [INFORMATION] button to call up the Information display for that mode. To exit from 
the display, press the button again (or any other panel button).

Voice mode

Bank

Indicates the MSB/LSB (page 224) of the currently selected 
Voice bank.

EL 1234

Indicates the currently selected Voice, on/off status of the 
four Elements and mono/poly (page 151) status.

Porta (Portamento)

Indicates the Portamento switch on/off status of the 
currently selected Voice.

PB (Pitch Bend)

Indicates the Upper/Lower setting of the Pitch Bend range.

InsA (Insertion A), InsB (Insertion B), Rev (Reverb), 
Cho (Chorus)

Indicates the currently selected effect type for each effect 
block (page 140).

Performance mode

Bank

Indicates the MSB/LSB (page 224) of the currently selected 
Performance bank.

Ins (Insertion)

Indicates the Part number to which the Insertion effect is 
applied.

Rev (Reverb), Cho (Chorus)

Indicates the currently selected effect type for each effect 
block (page 140).

Song mode

●

Song Play mode

Indicates the amount of currently unused (available) 
memory (DRAM) for song recording.

●

Song Mixing mode

Ins (Insertion)

Indicates the Part number to which the Insertion effect is 
applied.

Rev (Reverb), Cho (Chorus)

Indicates the currently selected effect type for each effect 
block (page 140).

●

Mixing Voice Edit mode

Bank

Indicates the MSB/LSB (page 224) of the currently selected 
Voice bank.

EL 1234

Indicates the currently selected Voice, and the on/off status 
of the four Elements.

InsA (Insertion A), InsB (Insertion B)

Indicates the currently selected effect type for each effect 
block.

Used Mix Voice

Current

Indicates the number of Parts using the Mixing Voices in the 
currently selected Song.

Total

Indicates the total number of Parts using the Mixing Voices 
in all the Songs and Patterns.

Содержание M06

















































































































































































































































Отзывы:

Нет отзывов