Yamaha LS9 Editor, Руководство пользователя

Страница: 257 / 290

Functions that can be assigned to user-defined keys
257
LS9-16/32 Owner’s Manual
Appendices
Functions that can be assigned to user-defined keys
Function PARAMETER 1 PARAMETER 2 LED Explanation
NO ASSIGN — — Dark No assignment
SCENE
RECALL —
Flash
Recall the currently selected scene
STORE — Store to the currently selected scene
▲
SCENE +1, LIST UP
SCENE +1 selects the next scene number. LIST UP scrolls
the scene list upward by one. Simultaneously pressing
[SCENE
▲
] and [SCENE
▼
] keys will return to the current
scene number. After scene 300, wrap around to scene
000.
▼
SCENE -1, LIST DOWN
SCENE -1 selects the previous scene number. LIST UP
scrolls the scene list upward by one. Simultaneously press-
ing [SCENE
▲
] and [SCENE
▼
] keys will return to the cur-
rent scene number. After scene 000, wrap around to scene
300.
INC RECALL — Recall the scene of the next existing number
DEC RECALL — Recall the scene of the previous existing number
DIRECT RECALL SCENE #000–#300 Directly recall the scene of the specified number
RECALL UNDO —
Lit if UNDO is possi-
ble
Execute RECALL UNDO
STORE UNDO —
Lit if UNDO is possi-
ble
Execute STORE UNDO
TALKBACK
TALKBACK ON
LATCH ON: lit, OFF: dark Switch TALKBACK on/off
UNLATCH ON: lit, OFF: dark Turn TALKBACK on while pressed
SELECTED CH
ASSIGN
—
Lit if assignment is
the same
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of an output channel to switch the assignment on/
off, and its state will be remembered. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
OSCILLATOR
OSCILLATOR ON — ON: lit, OFF: dark
Switch the OSC on/off
When this turns on, the OSC popup window will appear
SELECTED CH
ASSIGN
—
Lit if assignment is
the same
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of an output channel to switch the assignment on/
off, and its state will be remembered. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
CUE CLEAR — — Flash Clear all CUE settings together
MONITOR
MONITOR ON — ON: lit, OFF: dark Switch MONITOR on/off
SELECTED CH
ASSIGN
—
Lit if assignment is
the same
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of a MIX or MATRIX channel to switch the assign-
ment on/off, and its state will be remembered. During this
time, the [SEL] LED will be lit if assign is ON, or dark if OFF.
SOURCE SELECT
STEREO L/R,
MONO(C), LCR, 2TR
IN L/R, INPUT 15/16
{31/32}, PLAYBACK
OUT, DEFINE
Lit if the selected
monitor source is on
Recall the selected signal to the monitor
DIMMER ON — ON: lit, OFF: dark Switch the monitor dimmer function on/off
MONO MONITOR — ON: lit, OFF: dark Switch MONO MONITOR on/off
MONITOR ON MAS-
TER FADER
— ON: lit, OFF: dark
If this is on, you can use the master fader to control the
monitor level, and the ON key to switch the monitor out-
put on/off
EFFECT BYPASS RACK 5–8 — ON: lit, OFF: dark Bypass the specified effect
TAP TEMPO
CURRENT PAGE —
Blink in synchroniza-
tion to the tempo
Use the tap tempo function in the displayed screen
RACK 5–8 — Use the tap tempo function for the specified effect
MUTE MASTER MUTE GROUP 1–8 — ON: lit, OFF: dark Switch MUTE GROUP MASTER on/off
METER
PEAK HOLD ON — ON: lit, OFF: dark Turn the meter PEAK HOLD function on/off
STEREO/MONO(C)
SEL
—
MONO (C): lit, STE-
REO: dark
Switch the top panel STEREO L/R METER function