Yamaha LPX-500, Руководство пользователя

Страница: 22 / 80

17
Basic Operations
This adjusts computer images (INPUT A [RGB] and INPUT B [RGB] only) to the optimum condition.
Automatic adjustment involves adjustment of tracking , display position and synchronization (Sync) for
RGB signals.
Procedure
While an image is being projected from
the computer, press the [AUTO] button
on the remote control.
The screen will appear black while the
adjustment is being made.
Through mode
Squeeze Through mode
Automatic Adjustment of Computer Images
Automatic adjustment may not work properly with some types of signals which are output by
computers. In such cases, you may need to adjust the tracking and synchronization manually
using the projector menu. (p.28)
If the input signal resolution is 1280 x 720
dots or less, the images are projected onto
the screen with the input signal resolution
unchanged. Because of this, the size of the
displayed images will change depending
on the input resolution.
The picture quality will be the clearest for
portions of the image that have not been
resized horizontally or vertically.
If the input signal resolution is 1280 x 720
dots or less, the input signal resolution is
elongated horizontally and the images are
projected at an aspect ratio of 16:9.
Because of this, the size of the displayed
images will change depending on the input
resolution.
The portions that are not vertically resized
will appear with higher image quality.
Remote control
Focusing the
Screen Image Selecting the Image
Aspect Ratio
Selecting the
Picture Mode Automatic Adjustment
of Computer Images