65
Edit Menus /
AN200 Librarian
• Drag Mode
In the Pattern List combo box, a pattern can be dragged to another pattern location. This
setting determines the result of that operation: whether the pattern is copied to the new
location, or swapped with the pattern at the new location.
• The Pattern Init and Drag Mode functions are only effective when the User pattern bank is
selected.
The Librarian dialog box gives you a set of convenient, easy-to-use tools for organizing
the User patterns of your AN200 Files.
The Source box shows User patterns contained in the opened AN200 File (see
below). The Destination box contains the set of User patterns currently in
the AN200 Editor, and represents the new AN200 File to be created.
First copy the desired patterns from the Source to the Destination, then exit the Librar-
the new set of patterns as a AN200 File. You can open different AN200
Files one by one, and freely copy the desired patterns to the Destination before saving.
Copying a pattern from the Source box to the Destination box:
1) Click the desired pattern in the Source box. (This is the pattern you will be copying.)
2) Drag the highlighted pattern to the Destination box, and drop it at the desired number.
(This is the location to which the pattern will be copied. The previous pattern at the
location is erased and replaced with the new one.)
3) Click "OK" to exit the Librarian.
the newly created set of User patterns as a AN200 File.
AN200 Librarian
