Yamaha LEXI, Руководство пользователя, Страница: 93 / 112

Perio d ic maintenance an d a d justment
9-32
9
NOTICE
ECAU0081
If a turn si g nal li g ht b ul b of d ifferent
watta g e than recommen d e d is use d ,
the turn si g nal li g ht flashin g may b e
affecte d .
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panel.
EAUN1980
Replacin g a tail/ b rake li g ht
b ul b or a rear turn si g nal li g ht
b ul b
If a tail/brake light bulb or a rear turn
signal light bulb burns out, replace it as
follows.
Tail/ b rake li g ht b ul b
1. Remove panel C. (See page 9-8)
2. Remove the bulb socket (together
with the bulb) by turning it coun-
terclockwise and pulling the tail-
light bulb socket up at an angle.
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket
by pushing it in and turn it clock-
wise until it stops.
NOTICE
ECAU0091
If a tailli g ht b ul b of d ifferent watta g e
than recommen d e d is use d , it may
cause the b attery to d ischar g e or af-
fect the tailli g ht li g htin g .
5. Install the bulb socket (together
with the bulb) by turning it clock-
wise.
6. Install the panel.
Rear turn si g nal li g ht b ul b
1. Remove panel C. (See page 9-8)
2. Remove the bulb socket (together
with the bulb) by turning it coun-
terclockwise.
1. Tail/brake light bulb socket
1
UB4HEZE0.book Page 32 Wednesday, March 21, 2018 2:58 PM