Yamaha KODIAK 450 2020, Руководство пользователя

Страница: 33 / 174

4-3
4
NOTICE
ECB02401

The engine may overheat if the ATV is over-
loaded. Reduce the load to specification.

The engine may overheat if mud or dirt has
accumulated on the radiator. Gently clean
the radiator. (See page 9-1.)

Continuous use while the warning light is on
will damage the engine.
EBU27288
Engine trouble warning light “ ”
The electrical circuit of the warning light can be
checked by turning the key to “
” (on). The
warning light should come on for a few seconds,
and then go off.
If the warning light does not come on initially when
the key is turned to “
” (on), or if the warning
light remains on, have a Yamaha dealer check the
vehicle.
For non-differential gear lock models
This warning light comes on or flashes when an
electrical circuit monitoring the engine is not work-
ing correctly. When this occurs, have a Yamaha
dealer check the self-diagnosis system.
For differential gear lock models
This warning light comes on or flashes if a problem
is detected in the electrical circuit monitoring the
engine. When this occurs, the display will indicate
an error code (see page 4-6). Have a Yamaha
dealer check the self-diagnosis system.
EBU30572
Electric Power Steering warning light “EPS”
(equipped models)
This warning light comes on when the key is
turned to “
” (on), and then goes off once the
engine is started. If the warning light remains on or
comes on after the engine is started, the EPS sys-
tem may not be working correctly. When this oc-
curs, have a Yamaha dealer check the EPS
system.
The electrical circuit of the warning light can be
checked by turning the key to “
” (on). If the
warning light does not come on, have a Yamaha
dealer check the electrical circuit.
TIP

If the engine is stopped using the engine stop
switch and the key is in the “
” (on) position,
the EPS warning light comes on to indicate that
the power assistance for the steering is not
functioning.
UBB562E0.book Page 3 Thursday, March 14, 2019 9:59 AM