Yamaha HTR-6250 страница 54 Скачать руководство пользователя

Страница: 54 / 74

Troubleshooting

Note

•

In case of a transmission error without a status message appearing on the front panel display and the OSD, check the connection of your iPod (see
page 16).

Remote control

Problem

Cause

Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle.

The remote control will function within a maximum

range of 6 m (20 ft) and no more than 30 degrees

offaxis from the front panel.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, strobe

light, etc.) is striking the remote control

sensor of this unit.

Adjust the lighting angle or reposition this unit.

—

The batteries are weak.

Replace all batteries.

The remote control ID of the remote

control and this unit do not match.

Match the remote control ID of this unit and the

remote control.

The remote control code is not correctly

set.

Set the remote control code correctly using “List of

remote control codes” at the end of this manual.

Try setting another code of the same manufacturer

using “List of remote control codes” at the end of this

manual.

If this unit does not work when you press

Cursor

do the following.

When the key does not work during DVD disc menu

operation: press the

Input selection keys

the remote control again.

When the key does not work during OPTION menu/

SETUP menu operation: press the key applicable for

the current menu operation again.

—

Even if the remote control code is

correctly set, there are some models that

do not respond to the remote control.

iPod™

Problem

Cause

Remedy

See

page

This unit is in the middle of recognizing

the connection with your iPod.

This unit is in the middle of acquiring

song lists from your iPod.

Connect error

There is a problem with the signal path

from your iPod to this unit.

Turn off this unit and reconnect the Yamaha iPod

universal dock to the DOCK terminal of this unit.

Remove your iPod in the Yamaha iPod universal dock

and then place it back in the dock.

Unknown iPod

The iPod being used is not supported by

this unit.

This unit supports iPod Touch, iPod (Click Wheel),

iPod nano and iPod mini.

—

iPod Connected

Your iPod is properly placed in the

Yamaha iPod universal dock.

Содержание HTR-6250










































































Результаты поиска

Содержание HTR-6250

Отзывы:

Похожие инструкции для HTR-6250

Бренды по названию

Популярные бренды

Yamaha HTR-6250, Руководство пользователя

Результаты поиска

Содержание HTR-6250

Отзывы:

Похожие инструкции для HTR-6250

Бренды по названию

Популярные бренды