82
En
Customizing this unit (MANUAL SETUP)
■
Low-frequency effect level
B)LFE LEVEL
Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of
your subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective when the input
signal contains the LFE signal.
Control range: –20 to
0
dB
Control step: 1 dB
Speakers
SPEAKER
Adjusts the speaker LFE level.
Headphones
HEADPHONE
Adjusts the headphone LFE level.
Depending on the settings of “LFE/BASS OUT” (see page 76),
some signals may not be output at the SUBWOOFER PRE OUT
jack.
■
Dynamic range
C)DYNAMIC RANGE
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when this unit is
decoding bitstream signals.
Speakers
SPEAKER
Adjusts the dynamic range compression for the speakers.
Headphones
HEADPHONE
Adjusts the dynamic range compression for the
headphones.
Note
[]/[]:
[
p
]/[
[
]:
[
p
B)LFE LEVEL
SPEAKER
;;;;;;
0dB
HEADPHONE
;;;;
0dB
Up/Down
Adjust
.
Choice
Functions
MIN/AUTO
• MIN: Adjusts the dynamic range to narrow
when this unit is decoding bitstream signals
(except Dolby TrueHD).
• AUTO: Adjusts the dynamic range according
to the instruction of the input source signals
when this unit is decoding Dolby TrueHD
signals.
STD
Adjusts the dynamic range to medium. When
this unit is decoding Dolby TrueHD signals, the
dynamic range control is always active
regardless of the instruction of the input source
signals.
MAX
Preserves the greatest amount of dynamic range.
[]/[]:
[
p
]/[
[
]:
[
p
C)DYNAMIC RANGE
SPEAKER
;;;;;;;;;
MAX
HEADPHONE
;;;;;;;
MAX
Up/Down
Select
.
