CONFIGURATIONS
➤
Viewing information about the unit (Information menu)
En
104
Types of information
■
Audio Signal
Displays information about the current audio signal.
• Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the
specifications and settings of the playback device.
■
Video Signal
Displays information about the current video signal.
■
HDMI Monitor
Displays information about the TVs connected to the HDMI OUT jacks.
• (RX-V775 only)
Use the cursor keys (
q
/
w
) to switch between “OUT1” and “OUT2”.
■
Network
Displays the network information on the unit.
■
System
Displays the system information on the unit.
• If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating
the unit’s firmware via the network” (p.113).
■
Multi Zone
Displays information about Zone2.
Input
Format
Audio format of the input signal
Channel
The number of source channels in the input signal
(front/surround/LFE)
For example, “5.1 (3/2/0.1)” means 5.1ch in total
(3 front channels, 2 surround channels, and LFE).
Sampling
The number of samples per second of the input digital signal
Bitrate
The amount of data per second of the input bitstream signal
Dialogue
The dialogue normalization level of the input bitstream signal
Output
The speaker terminals from which signals are output
HDMI Signal
Presence or absence of HDMI signal input/output
HDMI Resolution
Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Analog Resolution
Resolutions of input signal (analog) and signal output at the MONITOR OUT
jacks (analog)
Interface
TV interface
Video Resolution
Resolutions supported by the TV
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
MAC Address
MAC address
Network Name
Network name (the unit’s name on the network)
Status
The connection status of the NETWORK jack
Remote ID
The unit’s remote control ID setting (p.105)
TV Format
The unit’s video signal type (p.106)
Speaker Impedance
The speaker impedance setting of the unit (p.105)
Tuner Freq. Step
(Asia and General models only)
The FM/AM tuning frequency setting of the unit (p.106)
System ID
System ID number
Firmware Version
The version of firmware installed on the unit
Input
The input source selected for Zone2
Volume
The volume setting for Zone2
