39
En
XM Satellite Radio tuning
BA
S
IC
OPERA
T
ION
English
y
When performing these operations with the remote control, press
C
XM
to select “XM” as the input source.
■
All Channel Search mode
1
Press
2
SEARCH MODE
(or
P
SRCH
MODE
) repeatedly to select “ALL CH
SEARCH”.
2
Press
5
PRESET/TUNING/CH
l
/
h
(or
G
PRESET/CH
k
/
n
) repeatedly to search
for a channel within all channels.
y
• You can search for a channel quickly by pressing and holding
5
PRESET/TUNING/CH
l
/
h
(or
G
PRESET/CH
k
/
n
).
• To display the XM Radio ID number displayed in the front
panel display, select channel “0”.
■
Category Search mode
1
Press
2
SEARCH MODE
(or
P
SRCH
MODE
) repeatedly to select “CAT SEARCH”.
2
Press
4
CATEGORY
(or
G
A-E/CAT.
l
/
h
)
repeatedly to change the channel category.
3
Press
5
PRESET/TUNING/CH
l
/
h
(or
G
PRESET/CH
k
/
n
) repeatedly to search
for a channel within the selected channel
category.
y
You can search for a channel quickly by pressing and holding
5
PRESET/TUNING/CH
l
/
h
(or
G
PRESET/CH
k
/
n
).
■
Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting XM Satellite Radio preset channels”
on page 40.
y
All preset channels (A1 to E8) recalls “001 Preview” by the initial
factory setting.
1
Press
2
SEARCH MODE
(or
P
SRCH
MODE
) repeatedly to select “PRESET
SEARCH”.
2
Press
4
CATEGORY
(or
G
A-E/CAT.
l
/
h
)
repeatedly to change the preset channel
group (A to E).
3
Press
5
PRESET/TUNING/CH
l
/
h
(or
G
PRESET/CH
k
/
n
) repeatedly to change
the preset channel number (1 to 8).
y
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) on the remote control.
■
Direct Number Access mode
1
Press
P
SRCH MODE
repeatedly to select
“ALL CH SEARCH” or “CAT SEARCH”.
2
Press the numeric buttons (
V
) to enter the
desired three-digit channel number.
For example, to enter the number 123, press the
numeric buttons as shown below.
The display changes as follows.
y
• To enter a one-digit or two-digit channel number, press the
numeric buttons (
V
) and then press
W
ENT.
to confirm the
input number. Instead of pressing
W
ENT.
to tune into the
channel immediately, you can wait a few seconds until this unit
confirms the entered channel number.
• If no button is pressed within a few seconds after you enter a
one-digit or two-digit number, this unit automatically confirms
the entered channel number.
• Pressing a button other than the numeric buttons
(
V
)
or
W
ENT.
cancels the Direct Number Access mode procedure.
l
1
h
2
ENHANCER
3
<XM> --1
<XM> -12
<XM>123
