15
RX-V495/RX-V495RDS/HTR-5140/HTR-5140RDS
No.5 SPEAKERS SET
The input is automatically discriminated by AC3>PCM>analog.
There are the following 9 submenu items: The signal from the DSP block is normally in the effect off status for menu
items 1-4. For other menu items, the same signal as in 2. DSP THROUGH: YSS908 menu is output.
SUB MENU
REMOTE
CENTER SP
REAR SP
MAIN SP
MAIN
LFE/BASS
OUTPUT
LEVEL
CODE
1
MAIN:S 0DB
7A-8B
LARGE
LARGE
SMALL
0dB
SWFR
MAIN L/R
2
MAIN:L 0DB
7A-8C
LARGE
LARGE
LARGE
0dB
SWFR
MAIN L/R
3
MAIN:L -10
7A-8D
LARGE
LARGE
LARGE
-10dB
SWFR
MAIN L/R
4
B:MAIN C:N
7A-8E
NONE
LARGE
LARGE
0dB
MAIN
MAIN L/R
5
LFE/B:MAIN
7A-8F
LARGE
LARGE
LARGE
0dB
MAIN
LFE -> L/R
6
LFE/B:SWFR
7A-90
LARGE
LARGE
LARGE
0dB
SWFR
LFE -> SWFR
7
C:NONE
7A-91
NONE
LARGE
LARGE
0dB
SWFR
CENTER -> L/R
8
C:S REAR:S
SMALL
SMALL
LARGE
0dB
SWFR
CENTER/REAR
9
FRONT MIX
7A-12
LARGE
LARGE
LARGE
0dB
SWFR
FRONT -> L/R
SUB MENU
PURPOSE
1
MAIN:S 0DB
Verification of the High and low pass filter response and gain in the bass redirection mode.
2
MAIN:L 0DB
Reference of the sub menu No. 1 and 2.
3
MAIN:L -10
Verification of the effect in the main level function.
4
B:MAIN C:N
Verification of the mixing circuit effect to the main channel.
5
LFE/B:MAIN
Verification of the bass mix gain.
6
LFE/B:SWFR
Verification of the LFE maximum output.
7
C:NONE
Verification of the center mix gain.
8
C:S REAR:S
Verification of the high and low pass filter response and gain in the bass redirection mode.
9
FRONT MIX
Verification of the front mix gain.
LARGE: Mode in which speakers with high bass-sound playback capability (large unit) are used. Sound in all signal widths
is output.
SMALL : Mode in which speakers with low bass-sound playback capability (small unit) are used. Signal of less than 90 Hz
is mixed with the channel specified by LFE/BASS.
NONE : Mode in which center speaker is not used. The center components with 3 dB subtracted are mixed into MAIN
L/R.
LFE/B : MAIN
: Mode in which subwoofer speaker is not used. The subwoofer components with 4.5 dB subtracted are branched
into MAIN L/R. But because of the phase difference, the MAIN L/R output is not simply summed.
The analog switches in each submenu are set as follows:
Purpose of the submenu as follows:
5 DVD/LD
MAIN:S 0DB
5 DVD/LD
B:MAIN C:N
5 DVD/LD
C:NONE
5 DVD/LD
MAIN:L 0DB
5 DVD/LD
LFE/B:MAIN
5 DVD/LD
C:S REAR:S
5 DVD/LD
MAIN:L —10
5 DVD/LD
LFE/B:SWFR
5 DVD/LD
FRONT MIX