CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
50
Sound
Configures the audio output settings.
■
DSP Parameter
Configures the surround decoder settings.
❑
Panorama
Enables/disables the broadening effect of the front sound field. When this function is
enabled, you can wrap front right/left channel sounds around the field and generate a
spacious sound field in combination with the surround sound field. This setting is
effective when “
b
PLII Music” is selected.
Settings
❑
Center Width
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective
when “
b
PLII Music” is selected.
Setting range
0 to 7
Default
3
❑
Dimension
Adjusts the difference in level between the front and surround sound fields. Higher to
strengthen the front sound field and lower to strengthen the surround sound field. This
setting is effective when “
b
PLII Music” is selected.
Setting range
-3 to +3
Default
0
❑
Center Image
Adjusts the center orientation level (broadening effect) of the front sound field. Higher
to strengthen the center orientation level (less broadening effect) and lower to weaken
(more broadening effect). This setting is effective when “Neo:6 Music” is selected.
Setting range
0.0 to 1.0
Default
0.3
■
Lipsync
Adjusts the delay between video and audio output.
• You can enable/disable the Lipsync function by input sources in “Lipsync” (p.42) in the “Option” menu.
❑
Select
Selects the method to adjust the delay between video and audio output.
Setting range
• “Select” is automatically set to “Manual” depending on the TV connected to the unit.
Off (default)
Disables the broadening effect of the front sound field.
On
Enables the broadening effect of the front sound field.
S e t u p
S p e a k e r
H D M I
S o u n d
E C O
F u n c t i o n
L a n g u a g e
D S P P a r a m e t e r
L i p s y n c
V o l u m e
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Auto (default)
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
