
8-65
8
EBU25701
Installing a wheel
1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
●
The arrow mark
on the tire must point toward
the rotating direction of the wheel.
●
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
1. Arrow mark
1
1. Tapered nut
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
U1HP61E0.book Page 65 Thursday, April 5, 2012 3:33 PM
Содержание GRIZZLY 700 2012
