Yamaha Grizzly 700 2011 Скачать руководство пользователя страница 48

Страница: 48 / 172

4-21

EBU18962

Front carrier

●

Do not exceed the load limit of 45.0 kg (99 lb) for
the front carrier.

●

Do not exceed the maximum load of 220.0 kg
(485 lb) for the ATV.

EBU18972

Rear carrier

●

Do not exceed the load limit of 85.0 kg (187 lb)
for the rear carrier.

●

Do not exceed the maximum load of 220.0 kg
(485 lb) for the ATV.

EBU30470

Adjusting the front and rear shock ab-
sorber assemblies

The spring preload can be adjusted to suit the rid-
er’s weight and the riding conditions.

WARNING

EWB00400

Always adjust the shock absorber assemblies
on the left and right side to the same setting.
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an ac-
cident.

1. Storage compartment drain plug

U1HP60E0.book Page 21 Monday, April 11, 2011 7:56 PM

Содержание Grizzly 700 2011













































































































































































Результаты поиска

Содержание Grizzly 700 2011

Отзывы:

Yamaha Grizzly 700 2011, Руководство пользователя, Страница: 48 / 172

Результаты поиска

Содержание Grizzly 700 2011

Отзывы: