manualshive.com logo in svg

Yamaha Grizzly 450 YFM45FGX, Руководство пользователя, Страница: 125 / 182

Поделиться
Скачать
Yamaha Grizzly 450 YFM45FGX Скачать руководство пользователя страница 125

8-30

8

●

If water has been added to the coolant, have
a Yamaha dealer check the antifreeze con-
tent of the coolant as soon as possible, oth-
erwise the effectiveness of the coolant will
be reduced.

14. Install the radiator cap, start the engine, let it

idle for several minutes, and then turn it off.

15. Remove the radiator cap to check the coolant

level in the radiator. If it is low, add sufficient
coolant until it reaches the top of the radiator,
and then install the radiator cap.

16. Start the engine, and then check for coolant

leakage.

NOTE:

If any leakage is found, have a Yamaha dealer
check the cooling system.

17. Install the panels and the front carrier.

EBU23631

Cleaning the air filter element 

The air filter element should be cleaned at the in-
tervals specified in the periodic maintenance and
lubrication chart. Clean the air filter element more
frequently if you are riding in unusually wet or dusty
areas.

NOTE:

There is a check hose at the bottom of the air filter
case. If dust or water collects in this hose, empty
the hose and clean the air filter element and air fil-
ter case.

1. Remove the seat. (See page 4-19.)
2. Remove the air filter case cover by unhooking

the holders.

1. Air filter case check hose

U17S10E0.book  Page 30  Friday, July 6, 2007  1:37 PM

Содержание Grizzly 450 YFM45FGX























































































































































































Отзывы:

Нет отзывов