Yamaha GRIZZLY 450 YFM450DF, Руководство пользователя

Страница: 62 / 170

6-1
6
EBU19882
OPERATION
EBU19902
Read the Owner’s Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWB00632
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU26546
Starting a cold engine
NOTICE
ECB00151
See the “Engine break-in” section on page 6-5
prior to operating the engine for the first time.
1. Turn the fuel cock to “ON”.
2. Turn the key to “ON” and the engine stop
switch to “ ”.
3. Shift the drive select lever into the neutral or
park position. The corresponding indicator
light should come on, if it does not come on,
have a Yamaha dealer check the electrical
circuit.
TIP
The engine can be started under the following
conditions:

The drive select lever is in the neutral or park po-
sition.

The rear brake lever is applied with the drive se-
lect lever in any position. However, it is recom-
mended to shift into the neutral or park position
before starting the engine.
4. Use the starter (choke) in reference to the fig-
ure:
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).
U2LC61E0.book Page 1 Wednesday, February 26, 2014 3:56 PM