Yamaha GRIZZLY 350 YFM35GX Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 134

Yamaha GRIZZLY 350 YFM35GX Скачать руководство пользователя страница 24

4-2

4

EBU17813

Indicator lights and warning light

EBU17850

Reverse indicator light “REVERSE”

This indicator light comes on when the transmis-
sion is in the reverse position.

EBU17870

Neutral indicator light “NEUTRAL”

This indicator light comes on when the transmis-
sion is in the neutral position.

EBU26931

Oil temperature warning light “

”

This warning light comes on when the engine over-
heats. When this occurs, stop the engine as soon
as it is safe to do so, and allow it to cool.
The electrical circuit of the warning light can be
checked by turning the key to “ON”, with the engine
stop switch set to “

”, and then pushing the start

switch.
If the warning light does not come on while the start
switch is being pushed, then go off after the start
switch is released, have a Yamaha dealer check
the electrical circuit.
If the warning light stays on, allow the engine to
cool. If the warning light stays on when the engine
is cool, have a Yamaha dealer check the electrical
circuit.

CAUTION:

ECB00010

●

The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to spec-
ification.

●

Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.

1. Reverse indicator light “REVERSE”
2. Neutral indicator light “NEUTRAL”

3. Oil temperature warning light “

”

U5WH64E0.book Page 2 Friday, April 20, 2007 3:28 PM

«
...
22
23
24
25
26
...
»

Содержание GRIZZLY 350 YFM35GX







































































































































Отзывы:

Нет отзывов