Yamaha GRIZZLY 350 YFM350FAZ Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 142

Yamaha GRIZZLY 350 YFM350FAZ Скачать руководство пользователя страница 41

4-16

4

EBU18962

Front carrier

●

Do not exceed the load limit of 40.0 kg (88 lb) for
the front carrier.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

EBU18972

Rear carrier

●

Do not exceed the load limit of 80.0 kg (176 lb)
for the rear carrier.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

EBU18992

Adjusting the front shock absorber as-
semblies

The spring preload can be adjusted to suit the rid-
er’s weight and the riding conditions.

WARNING

EWB00400

Always adjust the shock absorber assemblies
on the left and right side to the same setting.
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an ac-
cident.

Adjust the spring preload as follows.
Turn the spring preload adjusting ring in direction
(a) to increase the spring preload and thereby
harden the suspension, and in direction (b) to de-
crease the spring preload and thereby soften the
suspension.

1. Storage compartment check hose

U1AB60E0.book Page 16 Wednesday, April 29, 2009 10:19 AM

«
...
39
40
41
42
43
...
»

Содержание GRIZZLY 350 YFM350FAZ















































































































































Отзывы:

Нет отзывов