Yamaha GRIZZLY 125 YFM125GB Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 132

Yamaha GRIZZLY 125 YFM125GB Скачать руководство пользователя страница 26

4-4

4

EBU18323

Speed limiter

Your ATV is equipped with an adjustable speed
limiter. The speed limiter keeps the throttle from
fully opening, even when the throttle lever is
pushed to the maximum.

1. Loosen the locknut.
2. To increase the maximum engine power avail-

able and the maximum speed of the ATV, turn
the adjusting screw in direction (a). To de-
crease the maximum engine power available
and the maximum speed of the ATV, turn the
adjusting screw in direction (b). Do not turn
the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
aged. Always make sure the throttle lever free
play is adjusted to 1.0–3.0 mm (0.04–0.12 in).
(See page 8-26.)

WARNING! Improper ad-

justment of the speed limiter and throttle
could cause throttle cable damage or im-
proper throttle operation. You could lose
control, resulting in an accident.

[EWB00241]

3. Tighten the locknut.

EBU18391

Front brake lever

The front brake lever is located on the right handle-
bar. To apply the front brake, pull the brake lever
toward the handlebar grip.

1. Adjusting screw

2. Locknut

3. No more than 12 mm (0.47 in)

3

1

2

(a)

(b)

U1PY60E0.book Page 4 Friday, March 11, 2011 9:30 AM

«
...
24
25
26
27
28
...
»

Содержание GRIZZLY 125 YFM125GB





































































































































Отзывы:

Нет отзывов