manualshive.com logo in svg

Yamaha GRIZZLY 125 YFM125GB, Руководство пользователя, Страница: 119 / 132

Поделиться
Скачать
Yamaha GRIZZLY 125 YFM125GB Скачать руководство пользователя страница 119

8-50

8

EBU25791

Troubleshooting chart 

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the compression.

Supply fuel.

The engine does not start. 
Check the compression.

Operate the electric starter.

2. Compression

There is compression.

There is no compression.

Check the ignition.

Have a Yamaha dealer
check the ATV.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the ATV.

The engine does not start.
Have a Yamaha dealer
check the ATV.

The engine does not start.
Check the battery.

Operate the electric starter.

4. Battery

The engine turns over 
quickly.

The engine turns over 
slowly.

The battery is good.

Check the electrolyte level, recharge the
battery and check the lead connections.

Dry

Wet

Open the throttle halfway and operate
the electric starter.

U1PY60E0.book  Page 50  Friday, March 11, 2011  9:30 AM

Содержание GRIZZLY 125 YFM125GB





































































































































Отзывы:

Нет отзывов