manualshive.com logo in svg

Yamaha GCH I 237, Руководство пользователя, Страница: 32 / 94

Поделиться
Скачать
Yamaha GCH I 237 Скачать руководство пользователя страница 32

Control functions

24

NOTICE

ECS00221

Do not place sharp items in the storage
compartment. Fuel could leak if the fuel
tank is damaged.

The bottom of the storage compartment
may be hot during or immediately after
operating the snowmobile. It can cause
burns if it becomes extremely hot. Fur-
thermore, heat in the storage compart-
ment can affect the quality of food
items, and deform and discolor plastic
items.

Storage pouches

The storage pouches are located above the
rider footrests.
Use the storage pouches to store spare parts
and other small items.

Rear storage area and rear carrier

The rear storage area and the rear carrier are
located at the rear of the snowmobile.
The rear storage area is located under the
passenger seat and it can be used only when
the seat and backrest are removed.

WARNING

EWS00141

Do not use the rear carrier to lift the snow-
mobile. The snowmobile could fall, which
could result in severe injury or death.

To remove the passenger seat and backrest
1.

Open the rider seat. (See “Storage com-
partment” for details.)

2.

Remove the passenger seat bolts, slide
the passenger seat and backrest slightly
rearward, and then lift them straight up to
remove them.

1. Storage pouch

Maximum load limit:

0.3 kg (0.7 lbs)

1

1. Rear storage area
2. Rear carrier

Maximum load limit:

Rear storage area:

5 kg (11 lbs)

Rear carrier:

20 kg (44 lbs)

2

1

U8JES2E0.book  Page 24  Friday, March 28, 2014  11:06 AM

Содержание GCH I 237































































































Отзывы:

Нет отзывов