manualshive.com logo in svg

Yamaha GCH I 237, Руководство пользователя, Страница: 30 / 94

Поделиться
Скачать
Yamaha GCH I 237 Скачать руководство пользователя страница 30

Control functions

22

ESU10754

Drive guard

WARNING

EWS00403

Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.

Make sure that the drive guard is in-
stalled securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.

NOTICE

ECS00831

Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.

The drive guard is designed to cover the V-
belt clutch and V-belt in case parts break or
come loose.

ESU10762

V-belt holders

Keep a spare V-belt for emergency use by
placing it into the V-belt holders provided.

NOTICE

ECS00181

Make sure that the V-belt is installed se-
curely in the holders.

ESU10781

Carburetor coolant shut-off le-
ver

The carburetor coolant shut-off lever controls
the flow of coolant through the carburetor.
Make sure that the lever is in the “ON” posi-
tion to allow the coolant to flow and warm the
carburetor while the ambient temperature is
below 0 °C (32 °F).

NOTICE

ECS00201

When operating the snowmobile in tem-
peratures above 0 °C (32 °F), move the car-
buretor coolant shut-off lever to the “OFF”

1. Drive guard

1. V-belt holder

1. Carburetor coolant shut-off lever
2. “ON” (open) position
3. “OFF” (closed) position

U8JES2E0.book  Page 22  Friday, March 28, 2014  11:06 AM

Содержание GCH I 237































































































Отзывы:

Нет отзывов