Yamaha GCH I 237 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 94

Yamaha GCH I 237 Скачать руководство пользователя страница 29

Control functions

21

TIP

When the brake lever is squeezed, the brake
light comes on.

NOTICE

ECS00061

Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.

ESU10582

Parking brake lever

When parking the snowmobile or starting the
engine, apply the parking brake by moving
the parking brake lever to the left.

To release the parking brake, move the park-
ing brake lever to the right.

ESU12563

Shift lever

The shift lever is used to shift your snowmo-
bile into drive, reverse, or low. After coming to
a complete stop, pull the shift lever out, turn
it to the desired position (“D”, “R”, or “L”), and
then release it.

TIP

Make sure that the shift lever is completely
shifted into position.

NOTICE

ECS00073

Do not use the shift lever while the snow-
mobile is moving, otherwise the drive train
could be damaged.

1. Brake lever

1. Parking brake lever

1. Shift lever
2. “D” Drive (forward)
3. “R” Reverse
4. “L” Low (forward)

U8JES2E0.book Page 21 Friday, March 28, 2014 11:06 AM

«
...
27
28
29
30
31
...
»

Содержание GCH I 237































































































Отзывы:

Нет отзывов