manualshive.com logo in svg

Yamaha GCH I 237, Руководство пользователя, Страница: 26 / 94

Поделиться
Скачать
Yamaha GCH I 237 Скачать руководство пользователя страница 26

Control functions

18

If the fuel level warning indicator, the warning
light, and all segments of the fuel meter flash,
have a Yamaha dealer inspect the snowmo-
bile as soon as possible.

ESU10464

Oil level warning indicator “ ”

The oil level warning indicator and the warn-
ing light come on when the engine oil level is
low.

If the oil level warning indicator and the warn-
ing light come on, place the snowmobile on a
level surface and allow it to idle for one min-
ute.
If the oil level warning indicator and the warn-
ing light go off, the engine oil level is suffi-
cient, however it is getting low. Add engine oil
as soon as possible.

If the oil level warning indicator and the warn-
ing light do not go off, check the engine oil
level in the oil tank (see page 50 for engine oil
level checking procedures), and add engine
oil if necessary.
If the oil level warning indicator and the warn-
ing light still remain on, have a Yamaha dealer
check the snowmobile.

ESU10514

Coolant temperature warning 
indicator “ ”

If the engine overheats, the coolant tempera-
ture warning indicator and the warning light
come on. When this occurs, stop the engine
immediately and allow the engine to cool
down, and then check the coolant level in the
coolant reservoir. (See page 55 for checking
procedures.)

NOTICE

ECS00042

Do not continue to operate the engine if it
is overheating.

ESU12687

Self-diagnosis device

This model is equipped with a self-diagnosis
device for various electrical circuits.
If a problem is detected in any of those cir-
cuits, the warning light and the engine trouble
warning indicator flash, and an error code
flashes slowly in the meter display. Note the

1. Fuel level warning indicator “

”

2. Warning light “

”

3. Fuel meter

1. Oil level warning indicator “

”

2. Warning light “

”

1. Coolant temperature warning 

indicator “

”

2. Warning light “

”

U8JES2E0.book  Page 18  Friday, March 28, 2014  11:06 AM

Содержание GCH I 237































































































Отзывы:

Нет отзывов