Yamaha FZ6-SS 2004, Руководство по обслуживанию, Страница: 242 / 456

5-17
CAMSHAFTS
ENG
WARNING
20 Nm (2.0 m
S
kg, 15 ft
S
lb)
CAUTION:
6. Install:
S
timing chain tensioner
a. While lightly pressing the timing chain ten-
sioner rod by hand, turn the tensioner rod ful-
ly clockwise with a thin screwdriver
1 .
b. With the timing chain tensioner rod turned all
the way into the timing chain tensioner hous-
ing (with the thin screwdriver still installed),
install the gasket and the timing chain ten-
sioner
2 onto the cylinder block.
Always use a new gasket.
c. Tighten the timing chain tensioner bolts 3 to
the specified torque.
Timing chain tensioner bolt
12 Nm (1.2 m
S
kg, 8.7 ft
S
lb)
d. Remove the screwdriver, make sure that the
timing chain tensioner rod releases, and then
tighten the cap bolt to the specified torque.
Cap bolt
7 Nm (0.7 m
S
kg, 5.1 ft
S
lb)
7. Turn:
S
crankshaft
(several full turns clockwise)
8. Check:
S
“T” mark
a
Make sure the “T” mark on the pickup rotor is
aligned with the crankcase mating sure face
b .
S
camshaft sprocket match mark
c
Make sure the match marks on the camshaft
sprockets are aligned with the crankcase
mating surface
d .
Out of alignment
!
Adjust.
Refer to the installation steps above.
9. Tighten:
S
camshaft sprocket bolts 1
Be sure to tighten the camshaft sprocket
bolts to the specified torque to avoid the
possibility of the bolts coming loose and
damaging the engine.