background image

INSTRUMENT AND CONTROL FUNCTIONS

3-2

3

EAU10471

Main switch/steering lock 

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering.

NOTE:

Be sure to use the standard key (black
bow) for regular use of the vehicle. To
minimize the risk of losing the code re-
registering key (red bow), keep it in a
safe place and only use it for code re-
registering.

EAU38530

ON

All electrical circuits are supplied with
power; the meter lighting, taillight, li-
cense plate light and auxiliary light
come on, and the engine can be start-
ed. The key cannot be removed.

NOTE:

The headlight comes on automatically
when the engine is started and stays on
until the key is turned to “OFF”, even if
the engine stalls.

EAU10660

OFF

All electrical systems are off. The key
can be removed.

EAU10680

LOCK

The steering is locked, and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “OFF” po-

sition, and then turn it to “LOCK”
while still pushing it.

3. Remove the key.

1. Push.
2. Turn.

U1B322E0.book  Page 2  Monday, August 8, 2005  1:49 PM

ProCarManuals.com

Содержание FZ6-NV



























































































Отзывы: