Yamaha FXNytro FX10RTRSZ Скачать руководство пользователя | Manualshive

Страница: 36 / 92

background image

Pre-operation checks

30

ESU11071

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the
Owner’s Manual.

WARNING

EWS00191

Failure to inspect or maintain the vehicle properly increases the possibility of an acci-
dent or equipment damage. Do not operate the vehicle if you find any problem. If a prob-
lem cannot be corrected by the procedures provided in this manual, have the vehicle
inspected by a Yamaha dealer.

ESU11081

Pre-operation check list

ITEM

CHECKS

PAGE

Fuel

• Check fuel level.
• Refuel if necessary.
• Check fuel line for leakage.

Engine oil

• Check oil level in engine.
• If necessary, add recommended oil to specified

level.

• Check vehicle for oil leakage.

Coolant

• Check coolant level.
• Add if necessary.

V-belt

• Check for wear and damage.
• Replace if necessary.

Drive guard

• Make sure that drive guard is tightened securely.
• Check the drive guard mounts for damage.

Brake

• Check operation.
• If soft or spongy, have Yamaha dealer bleed hy-

draulic system.

• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in master cylinder.
• If necessary, add recommended brake fluid to

specified level.

• Check hydraulic system for leakage.

Air filter

• Check that there is no snow under the air filter ele-

ment.

• If necessary, brush off the snow.

Tool kit and recommended
equipment

• Check for proper placement.

Shroud and covers

• Make sure that the shroud and covers are securely

fastened.

Skis and ski runners

• Check for wear and damage.
• If necessary, have Yamaha dealer replace skis or

ski runners.

U8HK11E0.book Page 30 Thursday, April 9, 2009 8:43 AM

«
...
34
35
36
37
38
...
»

Содержание FXNytro FX10RTRSZ





























































































Отзывы:

Нет отзывов

Похожие инструкции для FXNytro FX10RTRSZ

Бренд: TransTank Страницы: 28

Бренд: VANDERHALL Страницы: 109

ATV8E - SERVICE

Бренд: Eton Страницы: 34

Wagon with tilt

Бренд: Texas Страницы: 42

RANGER XP 1000 2020

Бренд: Polaris Страницы: 156

Бренд: Landoll Страницы: 36

Бренд: KAYO MOTOR Страницы: 106

PRO HAULER YXP700

Бренд: Yamaha Страницы: 92

Expediter EX-21 2017

Бренд: Columbia Страницы: 32

Magnum 500 2000

Бренд: Polaris Страницы: 5

Бренд: Polaris Страницы: 13

600 IQ Widetrak

Бренд: Polaris Страницы: 140

2008 Scrambler 500 2X4 International

Бренд: Polaris Страницы: 124

Supersport 2007

Бренд: Polaris Страницы: 266

Бренд: Taylor-Dunn Страницы: 246

Бренд: Metal-Fach Страницы: 60

Бренд: SCORPION Страницы: 22

2003 TRX450FE Fourtrax Foreman FE

Бренд: Honda Страницы: 248

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды